Amana AVZC18 Series Service Instructions Manual page 75

SERVICING
SETTINGS MODE 2
< SCREEN 4 >
Setting Mode 2 allows the user to
change system settings. See table
in back of this section.
< SCREEN 2 >
< SCREEN 4 >
Press
RECALL
< SCREEN 0 >
Hold RECALL and TEST.
Press RECALL
to increase the number.
Press RECALL.
Press RECALL.
Press TEST
to change setting.
Press RECALL.
Press TEST to complete setting and return to setting mode.
SETTING THE MODE DISPLAY
OFF
ON
Blink interval:
0.4 sec. On - 0.4 sec. Off
Press LEARN.
< Changing setting display >
Press
RECALL.
Press RECALL.
Press RECALL.
75