Advertisement
Table of Contents
Table of Contents........................ 2
Safety Information...................... 2
Pre-Installation............................ 3
Planning Installation.................... 3
Specifications................................. 3
Tools Required............................... 3
Hardware Included...................... 4
Safety Information
IMPORTANT
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
NATIONAL ELECTRICAL CODE AND LOCAL BUILDING CODES BY A PERSON FAMILIAR
WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS
INVOLVED.
PRECAUTIONS
☐
Please read and understand this entire
manual before attempting to assem-
ble, install, or operate this light fixture.
☐
This light fixture requires a 120-Volt
AC power source.
☐
Some codes require installation by a
qualified electrician.
☐
This light fixture must be properly
grounded.
☐
Make sure connections are secure
using wire nuts, crimp-on lugs or other
approved connecting devices
☐
This light fixture should be installed
outdoors to a wall or eave.
☐
This product may contain chemicals
known to be hazardous. Thoroughly
wash hands after installing, handling,
cleaning or otherwise touching the
product.
INFORMATION: The device is tested and found to comply with Part 15 of the FCC Rules. Operation is subject
to two conditions: (1) This device may not cause harmful interference and, (2) this device must accept any
interference received, including any interference that may cause undesired operation.
These limits are designed to provide reasonable protections against harmful interference when the equip-
ment is operated in a commercial environment.
Visit www.probrite.com/install for installation video tutorials and product support
Package Contents........................ 4
Installation.................................... 5
Operation ..................................... 8
Care & Cleaning........................... 9
Troubleshooting......................... 10
Warranty...................................... 11
WARNING: Turn the power off at the circuit
breaker or fuse. Place tape over the circuit
breaker switch and verify power is off at the light
fixture.
WARNING: Risk of fire. Keep the lamp heads at
least 3 in. (76mm) from combustible materials.
CAUTION: Burn hazard. Allow the light fixture to
cool before touching.
NOTICE: For dimming use a 0-10V dimming
switch
NOTICE: FCC Regulations state that any
unauthorized changes or modifications to this
equipment not expressly approved by the man-
ufacturer could void the user's authorization to
operate this equipment.
2
Pre-Installation
PLANNING INSTALLATION
Before installing the light fixture, ensure that all parts are present. Compare parts with the
Hardware Included and Package Contents sections. If any part is missing or damaged, do
not attempt to assemble, install, or operate this light fixture.
Estimated installation time: 20 minutes
SPECIFICATIONS
Lumens (Light Output)
Watts (Power Consumption)
Replaces
Lumens/Watts (Efficacy)
Power Requirements (Input Voltage)
Light Color (CCT)
Dimmable
Operating Modes
TOOLS REQUIRED
Phillips
Wire strippers/
Screwdriver
cutters
Silicone
Sealant
Safety
goggles
Please call 1-844-507-5651 or email support@probrite.com for further assistance.
5130 Lumens
50 Watts LED
150 Watt Metal Halide
103 lumens per watt
120-277VAC
4000 Kelvins (Bright White)
Dimming (Use with 0-10V dimming switch)
Dusk-to-Dawn:
Automatically turns light fixture ON during night
and OFF during day.
Switch-Controlled:
Flip switch to turn light fixture ON and OFF. Use
included light sensor cap on fixture's light sensor
to utilize this mode setting.
Circuit tester
Ladder
Work
gloves
3
PROBRITE.COM
Advertisement
