Advertisement
Pre-Installation (continued)
HARDWARE KIT
NOTE: Hardware not shown to actual size.
AA
BB
DD
CC
Part
Description
#8-32 x 3/4" philips mounting bracket screw
AA
Wire nut
BB
Clear photocell (light sensor) screw-on cap
CC
Allen key
DD
PACKAGE CONTENTS
B
A
Part
Description
Light fixture
A
Photocell (light sensor)
B
Mounting plate tightening bolt (pre-installed)
C
Mounting plate with gasket (pre-installed)
D
Hanger Wire for hands-free installation (pre-installed)
E
F
Opaque photocell (light sensor) screw-on cap
Visit www.probrite.com/install for installation video tutorials and product support
Quantity
2
3
1
1
F
E
D
C
Quantity
1
1
1
1
1
1
4
Installation
1
For best results
☐
Install light 5-10 feet above the ground.
☐
Do not mount fixture close to reflective
surfaces such as windows, white walls,
white surfaces and water.
☐
When installing two fixtures on one
switch, make sure the switch is rated
for at least a 1A inductive load.
☐
Do NOT wire to a dimming switch.
☐
When mounting fixture, make sure the
photocell orientation is at the top.
☐
When mounting, make sure the fixture
is 7 in. on center away from eave and
13 inches on center away from inside
corner of the exterior wall (fig 1).
(fig 1).
2
Shut electric power off
☐
At wall switch verify it is in the off
position (fig 1).
☐
At the main electrical panel turn off
the circuit breaker that supplies power
to the outlet box you are working on
(fig 2).
☐
For screw-in type fuses unscrew the
fuse that supplies power to the outlet
box you are working on (fig 3).
Please call 1-844-507-5651 or email support@probrite.com for further assistance.
Wall Mount
NOTE: Mounting plate (D) mounts to
recessed mounted standard junction boxes.
Junction box must be at least 1-1/2 inch in
depth for proper installation for recessed
mount application (fig 2).
1-1/2"
1-1/2"
(fig 2).
Round
Octagonal
(fig 2).
(fig 1).
(fig 3).
5
PROBRITE.COM
Advertisement
