Advertisement
• Disconnect the camera.
• Insert the microSD card.
• Reconnect the camera.
• Wait approximately 2-3 minutes for the camera to cycle through the firmware update process.
• Use the setup guide to re-pair the camera to WIFI.
•
http://www.gadgets4geeks.com.au/WebRoot/Master/Shops/gadgets4geeks/MediaGallery/
xiaomi-yi-smart-camera-setup-guide.pdf
• Login to your router and check the camera IP address is in the DHCP list.
How to connect to your camera using a browser
• Use the following guide below using your own local IP address.
• Main stream: rtsp://x.x.x.x:554/ch0_0.h264
• Minor stream: rtsp://x.x.x.x:554/ch0_1.h264
• Audio stream: rtsp://x.x.x.x:554/ch0_3.h264
Need help? Feel free to contact us if you have any questions.
•
http://www.gadgets4geeks.com.au/contact-us
Advertisement
