Related Manuals for Fervi C033/150
Summary of Contents for Fervi C033/150
- Page 1 OPERATION AND MAINTENANCE MANUAL Digital caliper Art. C033/150, C033/200, C033/300 TRANSLATION OF THE ORIGINAL INSTRUCTIONS...
- Page 2 Manual on the date of its issuance (shown in this page). On the other hand, the instrument may also be subject to important technical changes in the future, without the manual being updated. Therefore, contact FERVI for information about modifications that may have been implemented. REV. 1...
-
Page 3: Description Of The Instrument
MEASURING INSTRUMENTS 1 WARNINGS 1. Before using the caliper clean the surface of the protective sticker using a clean, dry cloth. To remove stubborn dirt, use a cloth lightly dampened with ethyl alcohol. 2. Conditions of use Temperature: 5 – 40°C Relative humidity: less than 80% 3. -
Page 4: Technical Specifications And Functions
MEASURING INSTRUMENTS 3 TECHNICAL SPECIFICATIONS AND FUNCTIONS Resolution 0.01 mm Button-cell 1.5 V Battery Measuring speed ≤ 1.5 m/s Operating temperature 0 ~ +40°C Relative humidity < 80 % Storage temperature -10°C It is possible to reset the measurement in any position making it easy to perform incremental measurements It is possible to switch the measurement from millimetres to inches at any time during measuring. -
Page 5: Battery Replacement
MEASURING INSTRUMENTS 5 BATTERY REPLACEMENT Abnormal operation of the display, flashing digits or non-operation, is a symptom of a low battery inside the instrument. To replace the battery it is necessary to move the cover in the direction of the marked arrow and then replace the battery for another with identical specifications.