Advertisement
Step 6: (Optional) Connect GPS cable to the gateway
Figure 13: Connecting the GPS cable to the gateway
Step 7: Connect the power brick to a power source.
Step 8: Verify and test. Check the LED on the power brick.
The LED will be green when power is supplied to the gateway.
Gateway SIM and Data Connectivity
The gateway is provided with a SIM card for cellular backhaul. This includes 1GB of free data service, which
should be adequate for about one year of operation. If you need more data, you will need to sign up for a
cellular service plan and provide a replacement SIM card. The SIM card can be accessed through the clear,
sealed access port on the LoRa antenna side of the gateway (Figure 8, above).
Setting-up the Sensors
The purpose of this Kit is to track outdoor assets. To this end, set up the trackers as follows:
The device is turned on and off via an external magnet. To turn on a tracking sensor, place the magnet
(included) on the top-side of the tracking device near the end with the oval opening, as shown in Figure 15.
Advertisement
