Performance description ......................page 07 Connecting and installing modules....................page 08 Troubleshooting.........................page 10 Maintenance and repair......................page 10 Servicing............................page 10 Technical data ...........................page 11 Calculating effective and apparent power consumption............page 12 Page 2 Operating Manual U 100-230 and U 100-48 - Version 04-2018A...
Olefant 1-3 D-51427 Bergisch Gladbach (Germany) Tel.: (+49) 2204 405-0 All other parts of the software used with this product are subject to the copyright owned by ASTRO Strobel GmbH. Operating Manual U 100-230 and U 100-48 - Version 04-2018A...
Proper use Proper use The U 100-230 and u 100-48 base units can only be used for power supply of modules of the U 100 series. Modification of the devices or use for any other purpose is not permitted, and will immediately void any guarantee provided by the manufacturer.
In order to operate the U 100-230 unit (protection class I), it must be connected to mains sockets with a protective earth conductor.
Page 6
Store or use the device in a safe location, well out of reach of small children. It may contain small parts that can be swallowed or inhaled. Dispose of any small parts that are not needed. Page 6 Operating Manual U 100-230 and U 100-48 - Version 04-2018A...
Do not connect the mains adapter provided to any other products. Warranty conditions The general terms and conditions of ASTRO Strobel GmbH apply. You will find these in the current catalogue or on the Internet under “www.astro-kom.de”. Disposal All of our packaging material (cardboard boxes, inserts, plastic film and bags) is completely recyclable.
U 100 base unit, is correct, you must plug a corresponding jumper into the circuit board on the backplane. Proceed as described in the following. [1] Left slot [2] Middle slot [3] Right slot Figure 2: Coding the backplane by plugging in the bridge Page 8 Operating Manual U 100-230 and U 100-48 - Version 04-2018A...
Page 9
The backplane is now connected and installed. Once installed, it should correspond to the figure at the left. NOTE You can learn how to connect a plug-in module to your PC or laptop by reading the operating manual for the respective signal converter. Operating Manual U 100-230 and U 100-48 - Version 04-2018A Page 9...
U 100 is operating. Replacing power supply units After removing the screws from the cover of the power supply chamber (ASTRO logo), the power supply unit can be pulled forwards by hand using the mounting tab. When installing power supply units, do not touch the fan or fan grille and only use the mounting tab affixed to the power supply unit.
You will find more notes concerning power consumption in the operating manuals of the modules. Hints for calculation of effective and apparent power consumption of the U100-230 you will find in the following chapter or on request at the ASTRO client service. Operating Manual U 100-230 and U 100-48 - Version 04-2018A Page 11...
The (230V or 110V) current draw (I Examples: 3 units U114 and one U100SNT ECO: P : 88W ; P : 94,62W ; S :99,92VA ; =93% ; : 94,7% Net230 Net230 Pagte 12 Operating Manual U 100-230 and U 100-48 - Version 04-2018A...
Page 13
Calculating effective and apparent power consumption at mains when using U 100 SNT ECO switching power supplies Operating Manual U 100-230 and U 100-48 - Version 04-2018A Page 13...
Page 14
Calculating effective and apparent power consumption at mains when using U 100 SNT ECO switching power supplies Page 14 Operating Manual U 100-230 and U 100-48 - Version 04-2018A...
Page 15
Calculating effective and apparent power consumption at mains when using U 100 SNT ECO switching power supplies Operating Manual U 100-230 and U 100-48 - Version 04-2018A Page 15...
Page 16
Internet: www.astro-kom.de All the information contained in this document has been checked in good faith. The ASTRO company cannot be held liable for any damage or injury arising in connection with the use of these operating instructions. Operating Manual U 100-230 and U 100-48...
Need help?
Do you have a question about the U 100-230 and is the answer not in the manual?
Questions and answers