Remove/Install The Bottom Plate - Riccar SupraLite R10E Owner's Manual

Remove/Install the Bottom Plate

CAUTION: To reduce the risk of injury
from moving parts, unplug the vacuum
before servicing.
To Remove Bottom Plate
• After unplugging the power cord, turn
the vacuum cleaner over, exposing the
underside.
• Press the two holding tabs towards the
back of the nozzle. (Fig. 1) releasing
the bottom plate. Remove the bottom plate.
To Install Bottom Plate
• Make sure bottom plate hinge tabs are
in place before setting the plate (Fig. 2).
• Press the bottom plate into position until
it "clicks" on both sides.
HOW TO
Fig. 1
Fig. 2
9