Canon EOS Digital Rebel XT Firmware Update Procedures page 4

Hide thumbs Also See for EOS Digital Rebel XT:

EOS DIGITAL REBEL XT / EOS 350D DIGITAL Firmware Update Procedures

(3) Insert the CF card with the firmware into the

camera and turn the Main Switch on.

Rotate the Mode Dial to select <P> mode (or one of the

other modes in the creative zone).

Turn the camera ON, and then press the "MENU" button to

display the menu.

(4) After selecting "Firmware Ver.x.x.x", press the

"SET" button.

Press the Cross Keys to select the "Firmware Ver.x.x.x"

item at the bottom of the Set-up 2 menu, and then press the

"SET" button.

The firmware update screen will appear.

Press the Cross keys, select [OK], and then press the "SET"

button.

If the message on the left appears on the LCD monitor, the

CF card may not have been inserted or the firmware update

file may not have been properly copied to the CF card, so

please try again starting from step (1).

The message on the left will appear on the LCD monitor,

and the camera will check the version of its firmware.

Eos 350d