Resol DL3 Manual
Datalogger
Hide thumbs
Also See for DL3:
- Short manual (12 pages) ,
- Mounting and operation manual (36 pages) ,
- Short manual (92 pages)
Table of Contents
Related Manuals for Resol DL3
Summary of Contents for Resol DL3
- Page 1 Datalogger DL3 Mounting Operation Web interface Manual Thank you for buying this RESOL product. Please read this manual carefully to get the best performance from this unit. Please keep this manual carefully. www.resol.com...
- Page 2 WARNING! Warnings are indicated with a warn- in order to avoid danger and damage to people and ing triangle! The RESOL Datalogger DL3 is connected to RESOL property. Î They contain information controllers via the VBus interface. It enables logging ®...
-
Page 3: Table Of Contents
Displaying network configuration .....12 13.2 Unit conversion table...........24 Displaying data communication ......12 Accessories ..........25 Displaying the memory capacity ......12 Spare parts..........25 5.10 Displaying the remote access ......12 Basic configuration ........ 12 Finding the DL3 Datalogger by means of the Device-Discovery-Tool ........13... -
Page 4: Overview
Overview Be it solar thermal, heating or DHW heat exchange controllers – with the RESOL DL3 you can easily and conveniently log system data of up to 6 RESOL controllers. Get a comprehensive overview of all con- trollers connected with the large full graphic display. -
Page 5: Included
Initial installation must be effected by the system in- staller or qualifi ed personnel named by the system installer. If one of the items mentioned below is missing or de- fective, please contact your distributor: Datalogger DL3 Terminal block for extending the VBus cable ®... -
Page 6: Wall Mounting
Wall mounting Upper fastening The unit must only be located in dry interior rooms. It is not suitable for installation in hazardous locations Crosshead and should be protected against electromagnetic screw fields. Please pay attention to separate routing of sensor ca- bles and mains cables. -
Page 7: Electrical Connection
, pos. 3) 11 / 12 = VBus connection 6 (slave) ® to the controller (pos. 4) and the DL3 (pos. 1). To the VBus connections 1 ... 6, master devices (con- ® If necessary, extend the cable using the terminal trollers) can be connected. -
Page 8: Operating Controls, Display And Connections
1A m ax. In the bottom left-hand area of the status display, each 11 12 L A N U SB During normal operation, the display of the DL3 Da- VBus device connected with a functioning VBus ® ® talogger is in the status level (see fig.). -
Page 9: Lan Connector
Each sensor has its own screen. The data of the inputs CL and S1 to S3 are displayed each in their own Power supply connection The DL3 is equipped with a USB interface to which screen. the USB adapter cable can be connected. -
Page 10: Resol Vbus ® Connection
The menu bar at the top of the web interface con- ® tains the menu items Home, Data (see below) and The DL3 Datalogger is connected to one or several Login. RESOL controllers via VBus ® cables. The connection terminals are located inside the housing of the DL3 Datalogger. -
Page 11: Menu Overview
Displaying data in a tabular overview Network Display network configuration In this menu, a selection can be made whether to dis- play all live data, internal DL3 data or data of a con- Remote access Display remote access configuration troller connected. -
Page 12: Erasing Logged Data Over The Web Interface
In order to display the device date and the device • Total unique packet count since last reset as follows: time, proceed as follows: • Find the DL3 Datalogger by means of the Device- Î In the main menu Status, select the sub-menu Discovery-Tool General Displaying the memory capacity •... -
Page 13: Finding The Dl3 Datalogger By Means Of The Device-Discovery-Tool
All Dataloggers found are displayed. • German (de) Î Click the DL3 Datalogger to mark it, then click All DL3 Dataloggers found are displayed. • English (en) the Open button Î Click the DL3 Datalogger to mark it •... -
Page 14: Changing The User Password
Î Enter the new password into the Repeat new information to the DL3 Datalogger. date configuration password input field The firmware is the internal software of the DL3 Da- Î Click Save configuration Synchronising time information automatically talogger. Through firmware updates, the software will The Login window opens. -
Page 15: Configuring The Remote Access
Factory setting: http://www.resol-DL2.de/DL2/update. The remote access password is required whenever Î Click Save configuration a controller connected to the DL3 Datalogger is to The message Configuration saved successfully! be accessed via the RESOL ServiceCenter software. appears. -
Page 16: Advanced Configuration
Apply for a static IP address at an Internet Service DynDNS service provider. DynDNS services are usu- Provider (ISP). A static Internet address and the In order to access the router and the DL3 connected ally free of charge. corresponding access information will be pro-... -
Page 17: Accessing The Dl3 Datalogger Over Bacnet
The smaller the log interval, the more memory Î On the BACnet access tab, in the Enable Î Assign a static LAN IP address to the DL3 Data- capacity is used. BACnet access? input field, select Yes logger using the configuration menu of the router Î... -
Page 18: Log Mode Configuration
Log mode configuration Î In the dropdown menus, select the desired value Consult the system administrator before The data log mode determines how the DL3 Data- Î Click Save configuration changing the factory settings! logger behaves when its internal memory capacity is The message Configuration saved successfully! fully used. -
Page 19: Firmware Update With Sd Card
Î Format the SD card using the FAT 32 format follows: Î Click the Start download button Î Insert the SD card into the SD card slot of the DL3 Î Insert the SD card into the SD card slot Î Save the file in a folder of choice The operating control LED starts flashing (green). -
Page 20: Eliminating Errors
Solution The user password is not available. When the user password is not available, the DL3 Datalogger has to be reset to its factory settings in order to regain access to the web interface. When the DL3 Datalogger is reset to its factory settings, all logged data and the configuration will be erased. - Page 21 Î Check if the network cable is properly connected at both ends! Î Check if the firewall software of the computer inhibits the connection to the DL3 Datalogger Î Switch off the firewall software and use the Device-Discovery-Tool to find the DL3 Datalogger Î...
- Page 22 Problem Solution The DL3 Datalogger is not found by the Device- If Microsoft Windows is used, proceed as follows: Discovery-Tool. Î Click the Start symbol on the task bar Î In the Settings menu, select the Control panel Î Double-click the Internet Options symbol Î...
-
Page 23: Ordering Software
• XLS file, optimised for processing in a spreadsheet program compat- ible with MS Excel • A maximum of 65.535 data sets can be exported VBus ® protocol data • VBus ® file, optimised for processing in the RESOL ServiceCenter software Export file formats available in the web interface. -
Page 24: Unit Conversion Table
13.2 Unit conversion table Unit MBTU MMBTU 1 Wh 3.412128 0.003412 0.000003 1KWh 3412.128 3.412128 0.003412 1MWh 3412128 3412.128 3.412128 Unit g CO2_OIL kg CO2_OIL t CO2_OIL 1 Wh 0.568 0.000568 5,68 * 10 1KWh 0.568 0.000568 1MWh 568000 0.568 Unit g CO2_GAS kg CO2_GAS... -
Page 25: Accessories
Accessories Temperature sensors The product range includes high-precision platinum temperature sensors, fl atscrew sensors, outdoor temperature sensors, indoor temperature sensors, cylindrical clip-on sensors, also as complete sensors with immersion sleeve. Sensor-/VBus ® extension cable, 100 m coil Art. no.: 280 051 00 SD card Art. - Page 26 Notes...
- Page 27 Notes...
- Page 28 This mounting- and operation manual including all parts is copyrighted. Another The texts and drawings in this manual are correct to the best of our knowledge. As use outside the copyright requires the approval of RESOL – Elektronische Rege- faults can never be excluded, please note: lungen GmbH.
Need help?
Do you have a question about the DL3 and is the answer not in the manual?
Questions and answers