SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION 1. INSTALLATION WIFI MODULE IN SKIPPER 6000 SCALES CODE DESCRIPTION 4511013150 WIFI POWER BOARD +24v/+5v “500” TP LINK BCT72A WIFI MODULE + RESET BH-P5256 ADAPT. WIFI BLACK SCREW CL81Z 3,1x6 ZINC CL81Z31006B...
Page 4
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION 1. Dissasemble the plate support (allen 6 tool). 2. Dissasemble the housing (phillips screw driver). Ref: 30251574...
Page 5
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION 3. Assemble the reset button. Ref: 30251574...
Page 6
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION 4. Assemble wifi reset board (1) and wifi module (2) to the support (3) with 2 screws (4). Connect the indicated cable. 5. Push the cables to let them as flat as possible.
Page 7
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION 6. Assemble the module kit with 2 screws (5). Connect the indicated cable. 7. Connect the ethernet cable from communication board to wifi module. IMPORTANT TO CONNECT IT INTO THE RIGHT PLACE:...
Page 8
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION 8. Connect the ethernet cable (6) to the CPU. 9. Connect the ethernet cable to the wifi module. Ref: 30251574...
Page 9
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION 10. Place the reset sticker (8). 11. Assemble the housing. Ref: 30251574...
Page 10
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION 12. Assemble the plate support. Tighten the screws with torque wrench (1,2Nm). Ref: 30251574...
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION 2. CONFIGURATION OF WIFI MODULE Introduction 2.1. A power supply, connected to the power supply of the scale is installed together with the module. If you want to communicate with the scale by cable, it is necessary set the module as Client.
Page 12
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION Client: It connects to a network created by an Access Point or Router and acts as a Bridge. It is used to provide wireless connection to a device without wireless card.
Page 13
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION LAN- External Ethernet Connector LAN/WAN- Scale CPU IMPORTANT: If the module is configured for being connected to an access point, never connect the scale to the same network by cable, because it will crete a network group.
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION Device manual configuration 2.4. 1. Connect the PC to the Scale by cable and reset the wifi module, for that hold the reset button between 10-15 seconds. 2. Once pressed wait 60-70 seconds while the device is reset and restarted.
Page 15
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION Set the values of SSID, Access Point MAC and region. Wireless Name of Root AP (SSID): Type the name of the wireless network. MAC Address of Root AP (BSSID): Type the value of the Access Point MAC address.
Page 16
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION Drawback: To know your IP you must consult the DHCP server and know the MAC of each device. Static and leave default: Consist in not change the default IP. Advantage: You can always know the module IP without consulting the DHCP server.
Page 17
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION A message is shown below indicating that you must restart device to apply changes. Click on the link for it (Click here) 11. Create a configuration file It can be generated a configuration file to apply this configuration to other modules without doing all steps.
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION A file with settings is created. The default name is ‘Config.bin’ but it can be renamed. Module configuration through settings file 2.5. Is possible configure the module with all parameters loading a settings file.
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION MODULE SPECIFICATIONS HARDWARE FEATURES 1 10/100Mbps WAN/LAN Port, 1 10/100Mbps LAN Port Interface 1 USB Port 1 Reset Button Dimensions (W X D X H) 3.3 x 3.0 x 1.1 in. (85 x 75 x28 mm) Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b...
Page 20
SKIPPER 6000 TPLINK WIFI MODULE INSTALLATION AND CONFIGURATION SOFTWARE FEATURES WAN Type Dynamic IP/Static IP/PPPoE/PPTP/L2TP DHCP Server, Client, DHCP Client List,Address Reservation Quality of WMM, Bandwidth Control Service Port Virtual Server, Port Triggering, UPnP, DMZ Forwarding Dynamic DynDns, Comexe, NO-IP...
Need help?
Do you have a question about the SKIPPER 6000 and is the answer not in the manual?
Questions and answers