Heater Sports Heater Combo HTR599ABF Instructions Manual

Pitching machine

Advertisement

Quick Links

Read This Before
Operating The Heater
THE HEATER COMBO PITCHING MACHINE THROWS REAL REGULATION BALLS; HOWEVER,
THE ACCURACY OF THE HEATER DEPENDS ON THE QUALITY, HARDNESS AND TYPE OF
TREND SPORTS RECOMMENDS USING HEATER PITCHING MACHINE BALLS IN THE HEATER COMBO MACHINE.
THESE BALLS HAVE BEEN PRECISELY CRAFTED TO PROVIDE YOU WITH HOURS OF ACCURATE, TROUBLE FREE
BATTING AND FIELDING PRACTICE.

Heater Combo Pitching Machine Balls

Heater Pitching Machine Balls are recommended for use with the Heater Combo Machine. These
balls are incredibly accurate, long lasting, and produce the fastest ball speed.

Regulation Leather Balls:

The Heater Combo Pitching Machine works well with real leather balls; however, accuaracy will vary
more than with pitching machine balls because the seams on leather balls cause the machine to pinch the ball
differently on each pitch. Be sure and use real leather balls. Batters should be aware at all times.

KNOWN PROBLEMS WITH SIMULATED (SYNTHETIC) LEATHER COVERED BALLS . . .

Simulated (synthetic) leather balls:
Simulated leather balls are inexpensive seamed balls that don't work well in the Heater Combo
Machine. During operation, portions of the simulated leather cover comes off the ball and attaches to the
wheel of the Heater Combo. Also, during operation, consumers have reported seeing small puffs of smoke
coming out of the Heater Combo. These puffs are not smoke, but actual pieces of the simulated leather ball
being turned into small dust particles as they pitch out of the Heater Combo Pitching Machine.

IF BALLS GET WET, THEY WILL NOT PITCH PROPERLY UNTIL THEY DRY.

KNOWN FACTS ABOUT DIFFERENT BALLS:

The speed and accuracy of each pitch is dependent on the hardness, roundness, and type of each ball used.
For example: If you have 12 balls and four are softer than the others (these balls will throw lower than the
other balls), if four are harder than the others (these balls will throw higher than the other balls), and if four are
not round (these balls will throw inside and outside). THIS LEAVES THE USER WITH THE IMPRESSION THAT THE
HEATER COMBO PITCHING MACHINE IS INACCURATE WHICH IS NOT CORRECT.

IMPORTANT OPERATING INSTRUCTIONS

BALLS YOU USE IN THIS MACHINE!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Heater Combo HTR599ABF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Heater Sports Heater Combo HTR599ABF

  • Page 1 Read This Before Operating The Heater IMPORTANT OPERATING INSTRUCTIONS THE HEATER COMBO PITCHING MACHINE THROWS REAL REGULATION BALLS; HOWEVER, THE ACCURACY OF THE HEATER DEPENDS ON THE QUALITY, HARDNESS AND TYPE OF BALLS YOU USE IN THIS MACHINE! TREND SPORTS RECOMMENDS USING HEATER PITCHING MACHINE BALLS IN THE HEATER COMBO MACHINE. THESE BALLS HAVE BEEN PRECISELY CRAFTED TO PROVIDE YOU WITH HOURS OF ACCURATE, TROUBLE FREE BATTING AND FIELDING PRACTICE.
  • Page 2 Heater Combo ™ PITCHING MACHINE INSTRUCTIONS IMPORTANT DO NOT RETURN THIS PITCHING MACHINE TO THE RETAIL STORE WHERE PURCHASED. CALL TOLL FREE: (800) 492-9334. WARNING: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. SERIOUS BODILY INJURY MAY OCCUR! MAKE SURE MACHINE IS TURNED OFF BEFORE ASSEMBLY! KEEP HANDS AND ALL BODY PARTS AWAY FROM BASEBALL ENTRY AND EXIT! SERIOUS HAND AND BODILY INJURY MAY OCCUR! BASEBALL PITCHING MACHINE LEG ASSEMBLY...
  • Page 3 COMBO PITCHING MACHINE AUTO-BALL FEEDER ASSEMBLY STEP 1: Slide Sections A - B - C Together. Section C Section B Section A STEP 2: Insert 1/4” Short Bolt From Inside Of Feeder Through Hole In Feeder Bracket (4X). 1/4” Short Bolt STEP 3: Place Washer Over Short Bolt.
  • Page 4 Pre-Operating Instructions Check The Air Pressure In The Heater Combo Pitching Machine Tire. Warning: Make sure Heater Combo Pitching Machine is unplugged and the tire is not spinning during these operations. Pre-Operation #1 Locate Allen Wrench (provided in package) and unscrew (3) three wheel cover screws.
  • Page 5 Ball Size Adjustment Instructions MACHINE IS SET TO PITCH BASEBALLS AT THE FACTORY. Important: Make sure machine is unplugged and tire is not spinning during the following operations. Periodically inspect the tire to make sure it is not worn out, flat, or punctured.
  • Page 6 Ball Size Adjustment (Continued) MACHINE IS SET TO PITCH BASEBALLS AT THE FACTORY. Important: Make sure machine is unplugged and tire is not spinning during the following operations. Periodically inspect the tire to make sure it is not worn out, flat, or punctured.
  • Page 7 Heater Combo ™ Baseball Pitching Machine Instructions CAUTION! USE HEATER PITCHING MACHINE BALLS FOR THE MOST ACCURATE PITCH POSSIBLE. PITCHING MACHINES THAT USE A WHEEL TO THROW BALLS WILL NOT THROW REAL BALLS AS ACCURATE BECAUSE OF THE SEAMS ON THE BALL. IMPORTANT: THIS PRODUCT IS TO BE USED BY ADULTS ONLY.
  • Page 8 Knob Setting = 6 - 36, 34, 32 MPH • Knob Setting = 0 - 0, 0, 0 MPH Thank you for purchasing the Heater Combo Pitching Machine. If you have any questions or comments on how Heater Sports can improve the Heater Combo Pitching Machine, please call our 24 hour ®...

Table of Contents