Summary of Contents for Heater Sports Deuce 75 MPH DC799
Page 1
OWNER'S MANUAL Deuce 75 MPH Pitching Machine www.HeaterSports.com Model No. DC799 Serial No. Write the serial number in the space above for reference. ACTIVATE YOUR WARRANTY To register your product and activate your warranty, call 1-800-492-9334 CUSTOMER CARE For customer service inquiries, please call our toll free line at 1-800-492-9334.
PARTS LIST Housing Front Back Tripod Bracket Leg Sections - Total 9 Thumbscrews - Total 3 U-Brace Halves U-Brace Housing Hardware Part A: Part B: Ball Feeder Hardware Black U-Brace Bolt Black U-Brace Nut Auto Ball Feeder Tripod Back Hole Hardware Tripod Front Hole Hardware Part F: Part G:...
Page 3
MACHINE ASSEMBLY INSTRUCTIONS Back Front Front Back STEP 3: Insert Tripod Over STEP 1: Insert U-Shape Frame STEP 2: Locate "U-Brace U-Shape Frame. Make sure front into Machine and align holes in Housing Hardware" and leg of Tripod faces the front of bottom.
Page 4
DEUCE AUTO-BALL FEEDER ASSEMBLY STEP 1: Slide Sections A - B - C Together. Section C Section B Section A STEP 2: Insert 1/4” Short Bolt From Inside Of Feeder Through Hole In Feeder Bracket (4X). 1/4” Short Bolt STEP 3: Place Washer Over Short Bolt. Screw on Nut And Tighten Nut (4X). WARNING •...
Page 5
ACCURACY OF THE DEUCE DEPENDS ON THE QUALITY, HARDNESS AND TYPE OF BALLS YOU USE IN THIS MACHINE! HEATER SPORTS RECOMMENDS USING HEATER PITCHING MACHINE BALLS IN THE DEUCE MACHINE. THESE BALLS HAVE BEEN PRECISELY CRAFTED TO PROVIDE YOU WITH HOURS OF ACCURATE, TROUBLE FREE BATTING AND FIELDING PRACTICE.
Page 6
Pre-Operating Instructions Check The Air Pressure In The Deuce 75 Pitching Machine Tires & Check That The Black Hub & Tire Lines Align. Warning: Make sure Deuce Pitching Machine is unplugged and the tires are not spinning during these operations. Pre-Operation #1 Locate Allen Wrench (provided in package) and unscrew (6) six wheel cover screws for each wheel.
Operation Instructions CAUTION! USE HEATER PITCHING MACHINE BALLS FOR THE MOST ACCURATE PITCH POSSIBLE. PITCHING MACHINES THAT USE A WHEEL TO THROW BALLS WILL NOT THROW REAL BALLS AS ACCURATE BECAUSE OF THE SEAMS ON THE BALL. IMPORTANT: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS TURNED OFF BEFORE ASSEMBLY! KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL EXIT! SERIOUS HAND AND BODILY INJURY MAY RESULT IF USED INCORRECTLY! Step 1: Place balls into auto-ball feeder.
Page 8
Fast Ball/Curve Ball Instructions WARNING! ROTATING THE HEAD OF THE DEUCE FROM FAST BALL TO CURVE BALL POSITIONS CHANGES THE DIRECTION AND TRAJECTORY OF THE PITCHED BALL. MAKE SURE NO PERSONS ARE IN FRONT OF MACHINE WHILE ADJUSTING FOR FAST BALL OR CURVE BALL PITCHES. www.HeaterSports.com 800-492-9334...
Page 9
Knob Setting = 6, Est. Speed = 47 MPH • Knob Setting = 0, Est. Speed = 0 MPH Thank you for purchasing the Deuce 75 Pitching Machine. If you have any questions or comments on how Heater Sports can improve the Deuce Pitching Machine, please call our 24 hour customer service hotline at (800) 492-9334.
Need help?
Do you have a question about the Deuce 75 MPH DC799 and is the answer not in the manual?
Questions and answers