Advertisement
Table of Contents
Installation Instructions for LV303, 304,305, 306, 307, 308, 309 and LV310
WARNING
Avoid Fire or Electric Shock
• Follow installation instructions carefully.
• If unsure about electrical installation
consult a qualified electrician.
Important Safety
Instructions—read carefully
for your protection and save
all instructions.
•
Do not install any lampholder closer than 6" from any curtain or similar
combustible material.
•
•
•
•
•
•
•
•
Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • 770.486.4800 • FAX 770.486.4801
CAUTION: To reduce risk of fire and electrical shock, use only
fixtures and fittings intended for use with Linea LV series low voltage
lighting systems.
CAUTION: This fixture must be used with an isolating type transformer
with an electrical rating not exceeding 24 volts and 25 amps.
Lighted lamp is Hot!
WARNING: To reduce risk of fire or injury;
Turn off/unplug and allow to cool before replacing lamp.
Lamps get hot quickly! Contact only switch/plug when turning on.
Do not touch hot reflector or enclosure.
Keep lamp away from materials that may burn.
Do not touch lamp at any time. Use a soft cloth. Oil from skin may
damage lamp.
This fixture is suitable for use with open or shielded lamps and is
provided with an optional cover glass lens that is to be used for
lamps marked not suitable for open fixture use.
WARNING: To reduce risk of fire or injury read and follow lamp
manufacturer's instructions for containment requirements and do not
operate fixture with a missing or damaged lens when required.
702038
1
Advertisement
Table of Contents
Related Manuals for Cooper Lighting LINEA Series
Summary of Contents for Cooper Lighting LINEA Series
- Page 1 Installation Instructions for LV303, 304,305, 306, 307, 308, 309 and LV310 • CAUTION: To reduce risk of fire and electrical shock, use only fixtures and fittings intended for use with Linea LV series low voltage WARNING lighting systems. • CAUTION: This fixture must be used with an isolating type transformer Avoid Fire or Electric Shock with an electrical rating not exceeding 24 volts and 25 amps.
- Page 2 Installation Instructions for LV303, 304,305, 306, 307, 308, 309 and LV310 Lampholder Installation Twist 90° Insert Make sure power to the channel or wireway has been turned off. Install lamp with proper voltage for system voltage used. Hold lampholder as illustrated and insert into channel.
Need help?
Do you have a question about the LINEA Series and is the answer not in the manual?
Questions and answers