Panasonic NA-FS16V5 Operating & Installation Instructions Manual page 15

4
According to the water amount
indication
Put in detergent.
Approx. 20 seconds after the
water amount is displayed,
water supply begins.
5
Close the lid.
Operation ends with beeps.
Available in the "Normal" program, this function automatically adjusts the
operation time and water amount according to the detected amount of
laundry and water temperature.
ECONAVI will not work if you change the water amount or process settings.
Lamp indications
Flashing: Detecting
Lighting: ECONAVI enabled
Off: ECONAVI disabled
* Test conditions:
• "Normal" program
• Comparison between ECONAVI-enabled operation (amount of laundry: 4.0 kg, water
temperature: above 35 ºC) and ECONAVI-disabled operation (amount of laundry: 16.0 kg
(rated capacity), water temperature: below 15 ºC)
• Test was conducted based on IEC60456 except for water temperature.
After pressing "Start"
You can change the water level
until the end of the wash process.
You can change each of the
"Wash", "Rinse" and "Spin"
operation contents until the end of
the wash process. Press "Pause"
beforehand.
You cannot change the program.
ECONAVI
Switch on/off
1
2
Press and hold for
3
3 seconds
to select
4
or
5
(On)
(Off)
6 beeps
15