Installation instructions GW0002 works in two network modes: route mode and bridge mode. When it is under the route mode, the IP address of WAN port must be at different network segment from that of the LAN port. But when it is under the bridge mode, the IP address of WAN port is the same with that of LAN port.
(3) Log in the gateway and then click ‘Tools → Factory Reset’, then click Apply and restart the gateway. • Dial *111# to restart the gateway Xorcom Ltd. 8 Katom St., Misgav Industrial Park, 2017400, Israel Phone: +972 4 9951999, support@xorcom.com Xorcom USA 145 S Jefferson Ave Suite G Cookeville, TN 38501 USA Phone: 1-866-967-2661, info.usa@xorcom.com...