Comparison Mode; Current Configuration; Reset - Embisphere embiScan Configuration Manual

embiScan| HOW TO CONFIGURE THE EMBISCAN ?

Comparison mode

The comparison mode allows to check if the barcode read have the same information than the tag
information. This mode is automatically activated if the embiScan is connected to the socket.
FUNCTIONS
COMMON MODE
COMPARISON MODE

Current configuration

The following barcode return the current configuration of the embiScan. This one is displayed on the PC
Screen (see the user manual for more information on how to display information on the PC).
FUNCTION
CURRENT CONFIGURATION

Reset

The following barcode restore the embiScan factory settings
NB : after a
reset, it's not necessary to configure the hardware & country.
FUNCTION
FACTORY SETTINGS
E m b i s p h e r e C o n f i d e n t i a l & P r o p e r t y
BARCODE
NORMALE
COMPARISON
BARCODE
ACTUAL_CONFIG
BARCODE
RESET_USINE
P a g e 7 | 18