Table of Contents
Advertisement
OPERATING INSTRUCTIONS
Installing or removing battery pack (See Fig.1 Fig.2)
Always switch off the machine before insertion
or removal of the battery pack.
1
To remove the battery pack, push the button on
the battery pack and pull the tool unit from the
battery pack.
2
To insert the battery pack, align the tool unit
slides with the battery pack sliding groove and
push the tool unit into place. The tool unit can
be slipped into the battery pack in two direc-
tions.
3
Do not force the battery pack in sliding it into
tool unit. If the battery pack does not slide in
easily, it is not being inserted correctly.
Charging the Battery Pack (See Fig.3)
1
Plug the fast charger into the power source.
2
Slide the battery pack into the charger as the ar-
row direction shown on the charger.
3
Push the battery pack into place and make sure
the red light on the charger is "ON". The battery
pack is now starting the charging cycle.
4
After finish the charging cycle, the light will turn to green. The battery pack is
now ready for use.
5
Your new battery pack is not charged. You need to charge it before use.
6
Always use the specified charger to charge the battery. When the battery
pack is inserted into the charger correctly, the red light will come on and
charging will begin.
7
When you charge a new battery pack or a battery pack which has not been
used for a long period, it may not accept a full charge. This is a normal condi-
tion and does not indicate a problem. You can recharge the battery pack fully
after discharging it completely a couple of times.
8
Unplug the charger from the power source after finish the charge.
9
Please remove the battery from the unplugged charger for storage.
Fig 1
Fig 2
Fig 3
7
Advertisement
Table of Contents
