Sony DVP-NC650V Service Manual page 17

To turn on the player
Press POWER on the player. The player
enters standby mode and the power indicator
lights up in red. Press ?/1 on the remote. The
player turns on and the power indicator lights
up in green. In standby mode, the player also
turns on by pressing A on the player or by
pressing H.
To turn off the player
Press ?/1 on the remote. The player enters
standby mode and the power indicator lights
up in red. To turn off the player completely,
press POWER on the player. While playing a
disc, do not turn off the player by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the player, first
press x to stop playback and then press ?/1
on the remote.
To use headphones
Connect headphones to the PHONES jack
and adjust the headphones volume by turning
LEVEL.
Note
SACD audio signals are not output from the digital
jack.
34
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume
Play)
When you stop the disc, the player
remembers the point where you pressed x
and "RESUME" appears on the front panel
display. As long as you do not remove the
disc, Resume Play works even if the player
enters standby mode by pressing ?/1.
H x
1
While playing a disc, press to stop
x
playback.
"RESUME" appears on the front panel
display and you can restart the disc from
the point where you stopped the disc.
If "RESUME" does not appear, Resume
Play is not available.
2
Press .
H
The player starts playback from the point
where you stopped the disc in Step 1.
z
To play from the beginning of the disc, press
H
twice, then press .
36
Additional operations
./>
DISC SELECT 1 - 5
X x
H
open front door
LOAD DISC SKIP
Z
1 2 3
4 5 6
7 8 9
0
DISC SKIP
./> REPLAY
X
H
x
To Operation
Select a disc Press DISC SELECT 1
- 5 on the player
Stop x
Press
X
Pause Press
X H
Resume play after Press or
pause
Go to the next disc Press DISC SKIP
Go to the next chapter, >
Press
track, or scene in
continuous play mode
.
Go back to the Press
preceding chapter,
track, or scene in
continuous play mode
Z
Stop play and remove Press
the disc
Replay a previous Press REPLAY
scene (DVD VIDEO
only)
Notes
• Depending on where you stopped the disc, the player
may not resume playback from exactly the same
point.
• The point where you stopped playing is cleared
when:
– you turn the power off by pressing POWER on the
player.
– you change the play mode.
– you change the settings on the Setup Display.
– you load disc information by pressing LOAD on
the player
– you press MEGA CONTROL
x
To Operation
Check if a disc is in the Press LOAD on the
disc compartment player.
The DISC SELECT
A
indicator for each
compartment (1 - 5)
containing a disc lights
up.
z
The Replay function is useful when you want to
review a scene or dialog that you missed.
z
Before loading the discs, a DISC SELECT
indicator of an empty compartment may be lit.
Notes
• You may not be able to use the Replay function with
some scenes.
• If you turn the power off by pressing POWER on the
player, the loading information will be reset.
Replacing discs while playing a disc
(EXCHANGE)
You can open the disc tray while playing a
disc so that you can check which discs are to
be played next and replace discs without
interrupting playback of the current disc.
.
EXCHANGE
1
Press EXCHANGE.
The disc tray opens and two disc
compartments appear. Even if the player
is playing a disc, it doesn't stop playing.
2
Replace the discs in the compartments
with new ones.
3
Press DISC SKIP.
The disc tray turns and another two disc
compartments appear.
Using the DVD's Menu
A DVD is divided into long sections of a
picture or a music feature called "titles."
When you play a DVD which contains
several titles, you can select the title you want
using the TOP MENU button.
When you play DVDs that allow you to select
items such as the language for the subtitles
and the language for the sound, select these
items using the MENU button.
1 2 3
Number
4 5 6
buttons
7 8 9
0
TOP MENU
1
Press TOP MENU or MENU.
The disc's menu appears on the TV
screen.
The contents of the menu vary from disc
to disc.
2
Press C/X/x/c or the number buttons
to select the item you want to play or
change.
3
Press ENTER.
z
You can also display the disc's menu by pressing
TOP MENU or MENU on the player.
1-8
4
Replace the discs in the compartments
with new ones.
5
Press EXCHANGE.
The disc tray closes.
z
While the disc tray is open,
– If the playback of the current disc ends, the player
stops playing. If the disc is played in One Disc
Repeat Play mode, the current disc starts playing
again.
– In All Discs Shuffle Play mode (page 43), titles/
tracks/chapters are reshuffled only on the current
disc.
– In Program Play mode (page 41), the titles/tracks/
chapters only on the current disc are played.
Note
Do not push the disc tray to close in Step 5, as you may
damage the player.
DISC SKIP
Selecting "ORIGINAL" or
"PLAY LIST" on a DVD-RW
Disc
Some DVD-RW discs in VR (Video
Recording) mode have two types of titles for
playback: originally recorded titles
(ORIGINAL) and titles that can be created on
recordable DVD players for editing (PLAY
LIST). You can select the type of titles to be
played.
DISPLAY
MENU
ENTER
C/X/x/c 1
Press DISPLAY in stop mode.
The Control Menu appears.
2
Press X/x to select
(ORIGINAL/PLAY LIST), then press
ENTER.
The options for "ORIGINAL/PLAY
LIST" appear.
1
1 2 ( 2 7 )
1 8 ( 3 4 )
PLAY LIST
PLAY LIST
ORIGINAL
35
X/x
ENTER
STOP
DVD-RW


continued
37