Advertisement
Code Identification
1. Press and hold the P (Program) button until
the red indicator stays lit. Release the P
(Program) button.
2. Press and release the desired mode button
(TV, VCR, etc.). The red indicator blinks,
then stays lit.
3. Press and release the P (Program) button.
The indicator light blinks off.
4. To find the first digit for the code stored
under the mode key you pressed in step 2,
press each numeric key from 0-9 in turn.
When the indicator blinks off, the number
you pressed is the first digit for the code
you are searching for.
5. Repeat step 4 to find the second and third
digits. (Indicator goes off when third digit is
found).
Operation
1. Press the mode button for the desired
device.
2. Aim the remote at the device.
3. Press POWER to turn on the device.
4. Press other buttons to operate the features
of your device.
Note: The REC button must be pressed twice
to record from your VCR. For some brands of
VCRs, you might need to press the REC
button once, then press it again for three
seconds.
8
Troubleshooting
Remote does not operate your device.
• Press the mode button of the device you
want to control.
• Program the remote with a new code.
• Install new batteries. (You might have to
reprogram your remote after installing new
batteries.)
• Remote may not be compatible with your
device.
Remote does not operate some features of
your device.
• Program remote with a new code.
• Remote may not be able to operate all
features of your device or button names
might be different than your device.
Indicator light blinks after you program a
device code.
• Remote did not accept the code.
• Try to program the code again or try a
different code.
9
Hide quick links:
Advertisement
