Table Of Contents; Introduction; Setup; Battery Installation - NexxTech 1519001 Manual

Table of Contents

Introduction .................................................... 2
Setup ............................................................... 3
Battery Installation ..................................... 3
Battery Saver.............................................. 3
TV Volume Punch-Through ....................... 3
TV/VCR Punch-Through ........................... 3
Button Functions ............................................ 4
TV/VCR and TV/DVD Combo units ........ 5
Code Programming ......................................... 6
Direct Code Entry ...................................... 6
Code Search ............................................... 7
Code Identification .................................... 8
Product Operation ........................................... 8
Troubleshooting .............................................. 9

Introduction

Thank you for buying this Nexxtech 3-in-one
Universal Remote. You can use your remote to
replace a broken or lost remote or combine the
functions of up to three remotes.
This remote control operates the common
features of most (but not all) models and
brands of IR (Infrared) controlled video
equipment. This remote may support functions
that are not available on your device. Some
functions of your particular device (such as
menu functions) may not be controlled by this
remote. In such cases, use the original remote
control for your device.
Please use this manual to become familiar with
your remote, then install batteries and set up
your remote for your particular device and
brand.
2

Setup

Battery Installation

1. Push down on the tab on the back of the
remote and lift off the cover.
2. Install 2 AAA alkaline batteries (not in-
cluded) into the battery compartment as
indicated by the polarity symbols (+ and -)
marked inside.
3. Replace the cover.
When the remote's range decreases or it does
not operate properly, replace the batteries. You
have 2 minutes to change the batteries without
losing codes you have programmed. However,
do not press any buttons until batteries are
installed. If buttons are pressed without batter-
ies in the remote, all codes will be lost.

Battery Saver

Your remote automatically times out if the
buttons are pressed more than 30 seconds. This
will save your batteries should your remote get
stuck in a place (for example, between sofa
cushions) where the buttons remain pressed.
TV Volume/Mute Punch-Through
The TV Volume/Mute punch-through feature
lets you control the Volume and Mute function
of your TV in any mode programmed to be a
VCR, DVD, Cable, or SAT device without
changing to TV mode.

TV/VCR Punch-Through

VCR Punch-through is only available in TV
mode and any mode programmed for Cable,
the 6 VCR keys (Play, Pause, Stop, Record, FF
and Rewind) will punch-through to the device
programmed under VCR (in TV mode), or any
mode programmed for Cable.
3