Advertisement
Problem
Skin irritation occurs.
The skin cooler is not
cold enough.
Cause
The epilating head has
not been attached
correctly.
You used the epilator for
the first time or after a
long period of disuse.
The skin cooler was not
frozen long enough.
The skin cooler was not
put in the freezer or
freezing compartment.
ENGLISH
Solution
Place the epilating head
on the appliance and
press it onto the
appliance until it snaps
home ('click').
Some skin irritation may
occur the first few times
you use the appliance.
This is absolutely normal
and should quickly
disappear. For tips to
reduce skin irritation, see
the first section of
chapter 'Using the
appliance'. Also make
sure you keep the
epilating head clean.
Put the skin cooler
without the insulating
sleeve in the freezer or
freezing compartment
(***) for at least 4 hours.
When the colour of the
fluid has changed from
white to completely
blue, the skin cooler is
ready for use.
Put the skin cooler
without the insulating
sleeve in the freezer or
freezing compartment
(***) for at least 4 hours.
Do not store the skin
cooler in the refrigerator.
15
Advertisement
