Advertisement
A MIDDLEBY COMPANY
OWNER'S MANUAL
These instructions should be read thoroughly before attempting installation. Set up. installation and
Performance Check should be performed by a qualified service technician. The Manufacturer.
Southbend (1100 Old Honeycutt Rd.. Fuquay-Varina, North Carolina 27526), informs you that unless
the installation instructions for the above described Southbend product are followed and performed by
a qualified service technician, (a person experienced in and knowledgeable concerning the installation
of commercial gas and/or electrical cooking equipment) then the terms and conditions of the
Manufacturer's Limited Warranty will be rendered void and no warranty of any kind shall apply.
If the equipment has been changed, altered, modified or repaired by other than a qualified service
technician during or after the 12-month limited warranty period, then the manufacturer shall not be
liable for any incidental or consequential damages to any person or to any property which may result
from the use of the equipment thereafter. Some States do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion thereto may not apply to
you.
In the event you have any question concerning the installation, use, care, or service of the product,
write Customer Service Department, Southbend Corporation. 1100 Old Honeycutt Rd., Fuquay-
Varina, North Carolina 27526.
southbend
INSTALLATION
USER'S GUIDE
ELECTRIC COUNTER TILTING SKILLET
MODEL: BECT-12
Advertisement
Table of Contents
Related Manuals for Southbend BECT-12
Summary of Contents for Southbend BECT-12
- Page 1 Southbend (1100 Old Honeycutt Rd.. Fuquay-Varina, North Carolina 27526), informs you that unless the installation instructions for the above described Southbend product are followed and performed by a qualified service technician, (a person experienced in and knowledgeable concerning the installation of commercial gas and/or electrical cooking equipment) then the terms and conditions of the Manufacturer's Limited Warranty will be rendered void and no warranty of any kind shall apply.
- Page 2 OWNERS MANUAL ELECTRIC COUNTER TILTING SKILLET Model Capacity 55 liter ECTS-12 12 gallon...
- Page 3 INDEX We suggest that this entire Manual be read thoroughly and that all Instructions be followed carefully. SECTION PAGE DESCRIPTION Installation Instructions, Service Connections Operation Instructions, Temperature settings Cleaning Instructions Parts Lists Wiring Diagrams...
- Page 4 INSTALLATION INSTRUCTIONS SECTION: 1 Electric Counter Tilting Skillet MODEL: ECTS SET UP Ascertain correct position of skillet for tilting purposes on working surface. Approximately 30" (761 mm) Co front of base from wall. Be sure skillet tilts easily. Secure skillet by bolts -provided Co properly leveled working surface. Seal skillet to table top with Silastic or other sealing compound.
- Page 5 OPERATION INSTRUCTIONS SECTION: 2 MODEL: ECTS Electric Counter Tilting Ski OPERATION Ascertain that unit has been electrically connected and that circuit breakers are on. Place power switch in "ON" position. Set the thermostat dial Co high (#10). Preheat the unit and allow it to cycle thus equalizing heat across the entire surface. Cooking should be done at various temperature settings on the dial as determined by the user.
- Page 6 CLEANING INSTRUCTIONS SECTION: 3 MODEL: ECTS Electric Counter Tilting Skillet CLEANING The Electric Counter Tilting Skillet (ECTS) should be cleaned AFTER EACH USE. Soak cooking surface Co remove any food stuck Co the surface. Wash entire skillet surface with a mild detergent and water. Check Chat pouring spout, cover, and sides of unit as well as cooking surface are clean.
Need help?
Do you have a question about the BECT-12 and is the answer not in the manual?
Questions and answers