Table of Contents
Advertisement
Be careful where you place your hands
etc. during spring assembly as connector
points can pinch!
C. The following figures tell you how
to connect the springs most easily and
tighten the trampoline mat as steady as
possible.
D.
Choose a connecting ponit on the
frame of the trampoline . Use the
clock as help and choose the point that
points12 o'clock Position the spring on
the edge of jumping mat. Attach tool and
link up to the spring hook with hook end
of the tool. Pull the tool and attach the
spring hook link up to the frame. Repeat
this at the 6 o'clock point. Assemble in
the same way the first 4 springs at 12,6,3
and 9 o'clock.
E.
Repeat (D) to attach the remaining
springs in the same way. Take notice
that the thightness of the trampoline
mat should be shared equally. Therefore
attach always two springs across. This
is a very important issue for you will not
manage to attach all springs, beacause of
the thghtness of the trampoline mat will
increase with the numbers of attached
springs.
Finally after assembly the space between
all springs should be equal.
If you notice that you have skipped
a hole and V Ring connection,
recount and remove or attach
any springs required to maintain
the count of springs.
15
Advertisement
Table of Contents
