STEP 2 – Frame assembly
Follow the pictures to assemble the frame and to connect all legs.
Always assemble with two persons.
Insert T-section (#4) into one end of top rail (#3). Ensure the
hole in the T-section matches the hole in the rail. Use a rubber
mallet if necessary. Use the spring hook tool to help you to
spread the T-section if necessary. Repeat for the other T-
sections, but do not connect the top rail sections together yet.
Fit the leg tubes (#6) onto the T-sections using the spring
hook tool to compress the T-section. The T-sections must be
fitted to the wider end of the leg tubes. Take care not to pinch
your fingers when compressing the T-sections.
When assembling the trampoline's supporting leg, ensure that
the square holes into which the net's stands will be inserted,
are on the outside of the trampoline. It will be difficult to turn
them later.
Connect 2 top rail sections together. Repeat for the other top
rail sections as shown in Fig 3.
12