Advertisement
To connect MaxRace F-1 v.5 to Logitech™ MOMO racing wheel,
wait for the MOMO racing wheel to complete it's self test (clockwise and
anti-clockwise for 120 degree, the wheel returns to the middle from the force
feedback), press the gas pedal (RT pedal) to activate the MOMO racing
wheel.
(2) Custom buttons setting on the Racing wheel.
The custom setting is based on your own needs to reset on different kinds of games.
A: Custom setting for the gear shifter
The default setting for the gear shifter is push up =
, push down =
, to
set the push up to
, the steps are shown below:
First, press the program button P <8> , the digit tube shows
, press the
button
on the PS 4 controller, the digit tube
on MacRace F-1 v.5 blinks, push the stick
upwards and push the shift lever back to neutral, the digit tube
on MacRace F-1
v.5 turns off, the setting is completed.
B：Swapping the racing wheel button functions:
Logitech™ G25/G27/GT/MOMO racing wheel button functions (Except Guide key）
can be swapped, the operating method is shown below:
on the racing wheel to the PS 4 controller X button: Press the
To swap the button
, then press the X button on the PS 4 controller,
"P" switch, the digit tube shows
and blinks. Press the Racing wheel
the digit tube shows
button, the digit
tube
turns off. The setting procedure is completed and the
button now
contains the X button function.
button function on the racing wheel is the same as press the X button
Pressing the
on the PS 4 controller.
To restore the default function on the
button, the step is shown below:
1.Press the "P" key ,the digit tube shows
,
Advertisement
