Advertisement
Quick Links
1.
Features：
Two new D-pads: One of them is the new designed D pad made for fighting game.
New diamond shaped Guide key – the diamond shape GUIDE key will emits a colourful
bright light once it lits up.
Note: Only the X 1 wireless controller shell with rapid fire model is built with the auto fire
function on the two triggers buttons.
Includes four (4) LED analog thumb sticks (2pcs of Concave and 2pcs of Convex), a LED kit
set for lighting up all buttons.
2.
Package includes:
A. X1（Plus）replacement shell
B. PC board x 1pcs
C. Screw driver x 2pcs
D. D pad x 1sets , LED analog thumb sticks x 4pcs (2pcs of Concave and 2pcs of Convex)
E. Phillips screws x 2pcs
F. Rumble motor x 2pcs- for RT and LT button as shown on the picture below:
3.
Installation
The Xbox 360 wireless controller has 2 different versions, check before installation.
A: Version 1 of Xbox 360™ wireless controllers.
XCM X1 wireless controller shell (Plus)
Usage manual
Advertisement
Related Manuals for XCM X1
Summary of Contents for XCM X1
- Page 1 XCM X1 wireless controller shell (Plus) Usage manual Features： Two new D-pads: One of them is the new designed D pad made for fighting game. New diamond shaped Guide key – the diamond shape GUIDE key will emits a colourful bright light once it lits up.
- Page 2 （A-1）Place the PCB of X1(Plus) on to the 360 wireless controller board. （A-2）Solder the 5 points (arrow indicates)
- Page 3 （A-3）Solder the point As shown on the pictures (A, B, C, D), solder the providing wires to its correct position. A- connects to the Blue wire, B- connects to the Black wire, C- connects to the Red wire, D- connects to the Green wire.
- Page 5 （A-4）Remove the stickers of the double-sided tape. （A-5）Stick the 2 round PCB to the arrow indicated area and solder up the 4 points (red circle indicated)
- Page 6 B: Version 2 of Xbox 360™ wireless controllers. （B-1）Place the PCB of X1(Plus) to the 360 wireless controller board.
- Page 7 （B-2）Solder the 4 points (arrow indicates) （B-3）Solder the indicated area As shown in the pictures (A, B, C, D), solder the providing wires to its correct place. A-connects to the Blue wire, B- connects to the Black wire, C- connects to the Red wire and D - connects to the Green wire.
- Page 9 （B-4）Remove the stickers of the double-sided tape.
- Page 10 （B-5）Stick the 2 round PCB to the arrow indicated area and solder the 4 points (white circle indicated) 4. As shown in the diagram, install the RT and LT buttons step by step.
- Page 11 LT, RT buttons. Correctly place the PC board to X1 (plus) replacement shell, finally plug the soft flat cable to the socket (as shown on the picture below, the arrow indicated) 6. Now cover up the bottom part of X1 (Plus) replacement shell and tighten it with screws, the installation is now completed.
- Page 12 8. How to operate: a: Rapid fire function (with AUTO AIM function) X1 (plus) shell built in with the rapid fire function on 2 Triggers, the RT and LT triggers, the rapid fire rate is 20 shots per seconds Turn on/off the rapid fire function: press and hold the LT button then press the P button once, release the LT and P button , you are now able to turn on or off the rapid fire function.
- Page 13 LED Monochromatic light settings X1(Plus) built in many LED light on variety buttons, the Back, Start, A, B, X, Y, RB, LB buttons are monochromatic light , you are able to adjust the LED brightness in 5 levels, the setting method is shown below.
Need help?
Do you have a question about the X1 and is the answer not in the manual?
Questions and answers