Advertisement
<10> USB port.
PlayStation 4™ wired controller port (connect via charging cable)
How to connect:
Note: the Official WIRED PlayStation 4™ Dualshock 4 controller must be required
to use on MaxRace F-1 v.5. The steps are shown below:
1. Plug the DualShock4 wired controller to the MaxRace F-1 v.5
2. Connect MaxRace F-1 v.5 to PlayStation 4™, and wait until the light bar on
the DualShock4 lights up in blue, the connection is successful.
3. Plug in the Xbox 360™/PS3™ wired controller or G25/G27/GT/MOMO
racing wheel.
How to use the Rapid fire function:
The Rapid fire function only operates on PlayStation 4™/PlayStation 3™/Xbox
360™ wired controller on MaxRace F-1 V.5.
To set the rapid fire function on the X button of the PS4 wired controller, the setting
step is as below:
Press the P button <8>, when the digit tube shows T "
", press the
Advertisement
