Programming Commands; Exit Programming Mode - Philips HD8837/32 Operating Instructions Manual

PROGRAMMING
The user can change some of the ma-
chine operating parameters to suit his/
her needs.
Enter the "menu"
The programming menu can only be ac-
cessed when the machine is in "stand-by"
mode.
To change the machine status to stand-by
mode, press the ON/OFF button.
Black
When the machine is in stand-by mode,
press the "
gramming.
The fi rst page that is displayed is shown
here.
Orange
• 20 • • 20 •
"button to access pro-

Programming commands

Changes can be made on each page:
Orange
- The " " and "
you to change the value of the function,
among those appearing on the page.
- The " " button allows you to scroll
the functions and to store the changes
that were made.
Note: Changes can be stored
only after the displayed value
is changed; when the displayed
value is changed the "OK" message
Orange
appears.
- The "ON/OFF" button allows you to exit
the change or programming mode.

Exit programming mode

To exit the programming mode, press the
ON/OFF button until the stand-by page is
displayed.
Note: The machine will exit
the programming mode if
the user does not do anything for
30 seconds. The settings that were
changed but not confi rmed will not
be stored.
Black
" buttons allow