Advertisement
Quick Links
Item Checklist
-
Venetian Blind
-
Brackets & Screws
Fibro
-
Use the provided
screws
Installing Auto-Lock Arm Awning
Tools Required
Fixing Type
Timber
-
Use the provided
screws
-
Cordless Drill (with Hammer
capability if masonry wall)
-
#2 Phillips Head drill bit.
-
Metal Tape Measure
-
Pencil
Concrete, Brick or Stone
-
Use the provided
screws
-
50mm Green Wall
Plugs
-
6.5mm Masonry
Drill Bit
Hammer
-
(These items need to be
purchased separately)
Advertisement
Summary of Contents for Baha Auto-Lock Arm Awning
- Page 1 Installing Auto-Lock Arm Awning Item Checklist Tools Required Venetian Blind Cordless Drill (with Hammer Brackets & Screws capability if masonry wall) #2 Phillips Head drill bit. Metal Tape Measure Pencil Fixing Type Fibro Timber Concrete, Brick or Stone Use the provided Use the provided Use the provided screws screws screws 50mm Green Wall Plugs 6.5mm Masonry Drill Bit Hammer (These items need to be purchased separately)
- Page 2 Start by using your template on the left side of your window to mark the holes of your hood and side arms. Once you have marked the holes, pre drill them and insert the wall plugs. Now insert the top hood tab screw, but do not fully tighten the screw and hang...
- Page 3 Proceed to mount the Side Rails to the wall using the lower pre drilled screw holes Mounting the Awning To mount your Awning, insert the "pin end" first and drop the flat end from the top of the bracket.Take your base rail arms and attach them to the base rail of your awning.
- Page 4 Place the U-Brackets approx 100mm from the bottom of the side rails and screw into place on both sides (you can raise the blind again once you have positioning for the U- Brackets). Your Awning is now professionally installed and you just saved on the installation expense! BAHA offer a 5-year warranty on your new blinds. Please see further details on our webpage. For further information please contact our customer service team Monday to Friday 9am to 5pm Phone: 1800 039 171 or Email: sales@baha.com.au...