General Description; Carton Content - Baxi SILA RCT MINI Installation, Function And Maintenance Instructions

ENGLISH

GENERAL DESCRIPTION

SILA RCT MINI is a residential heat recovery unit system equipped with speed selector (3 velocities) and by-pass. This
units has beeen designed in order to guarantee a continuous air exchange into the home ambient, by mean a piping and
grid network. Heat is recovered from the "dirty air" expelled from the room, using a high performance heat exchanger, and
transfered to the "fresh" supplied air. The extracted air is then discharged to outside via a single duct and grille.
The recovery unit is also equipped with a warning system for filter maintenance. (for info, see paragraph CLEANING THE
FILTER).
The case is constructed in aluminium/zinc coated steel. Internal faces of the casing are acoustically lined with flame
retardant acoustic foam.
NOTE: For additional ancillary equipment (e.g. ducting. grilles etc.) contact the Sales Department.
Figure 2a and 2b. SILA RCT MINI with a cut out section showing the fans & PCB.

CARTON CONTENT

COMPONENT CHECK LIST
Component
Heat Recovery Unit
Fixing Bracket & Screws
6mm x 19mm/21.5mm Condense Adapter
Straight Hose Connector
Installation, Servicing & Maintenance Instructions
Controller
Grille
Grille mounting frame
2a
12
14
17
13
48
15
13
16
Qtà
1
2
1
1
1
1
1
1