Q348 Disassembly guide 2: CAUTIONS Flashing & Servicing must be undertaken by qualified personnel only. Ensure all work is carried out at an anti-static workstation and that an anti-static wrist strap is worn. III. Use only approved Tools & components as specified in the parts list.
Page 3
Q348 Disassembly guide 2、 Tear off the IMEI label by hand. 3、 Unscrew the screws by screw drive.
Page 4
Q348 Disassembly guide 4、 Unmount the back cover by hand. 5、 Remove the back cover by hand. Note: Please don’t move SRT over the camera module to avoid damage of Camera FPC...
Page 5
Q348 Disassembly guide 6、 Remove the take a picture key by tweezers. 7、 Remove the power key by tweezers.
Page 6
Q348 Disassembly guide 8、 Remove the volume key by tweezers. 9、Unmount the battery by tweezer.
Page 7
Q348 Disassembly guide 10、 Remove the battery by card. 11、 Remove the Silicon gel cover for earphone by tweezers.
Page 8
Q348 Disassembly guide 12、Unmount the RF coaxial line by screw driver. 13、 Unmount the take a picture key FPC by tweezers.
Page 9
Q348 Disassembly guide 14、 Unmount the main FPC by tweezers. 15、 Remove the small PCB by tweezers.
Page 10
Q348 Disassembly guide 16、 Unmount the LCD&TP FPC connector by tweezers. 17、 Unmount the volume key FPC by tweezers.
Page 11
Q348 Disassembly guide 18、 Remove the front camera by tweezers. 19、 Remove the main camera by tweezers .
Page 12
Q348 Disassembly guide 20、Remove the power key FPC by tweezers. 21、 Remove the main FPC by tweezers.
Page 13
Q348 Disassembly guide 22、 Unscrews the screw by screw drive. 23、Remove the PCB by tweezers.
Page 14
Q348 Disassembly guide 24、Remove the RF coaxial line by tweezers. 25、 Remove the Silicon gel cover for distance sensor by tweezers.
Page 15
Q348 Disassembly guide 26、Remove the receiver by tweezers. 27、 Remove the Silicon gel cover for LED by tweezers.
Page 16
Q348 Disassembly guide 28、Heat the TP around use hot air gun (100 degree). 29、 Remove the TP by sucker and pick. Thanks For any Query or suggestion, Please write to tech.help@micromaxinfo.com...