Advertisement
Advertisement
Related Manuals for Sol*Aire Caldo Series
Summary of Contents for Sol*Aire Caldo Series
- Page 1 Caldo Panel Heater Instruction Manual...
-
Page 2: Table Of Contents
Contents Safety Instructions PAGE 3 Installation Instructions Page 4-5 Control Panel Page 6 Manual Operation Page 7 Connecting to WiFi Page 8-9 Controlling the heater Page 10-11 ERP Label Page 12-13 Warranty and Disposal Page 14... -
Page 3: Safety Instructions
Safety Instructions Read the manual before using the heater. Keep the manual for future reference. • Before use, check that the heater and its accessories are complete and intact. • The heater must be installed as per installation instructions. The heater must be plugged in- •... -
Page 4: Installation Instructions
Installation Instructions Before installing, check that all parts are complete, and the product is intact. If you want to use the electric heater freestanding, please fit the feet provided with the heater, following the instructions below. Make sure the heater is mounted on a level, stable and clean surface. - Page 5 2. Aim the 4 holes in the back of the heater to the 4 hooks on the wall bracket and push it on. Then slide into the slot to click on, as shown below. Fix the wall bracket lock piece onto the bracket with screws, slide the lock piece into the lock- ing slot on the back of the machine, and then tighten the screw, as shown in the picture below.
-
Page 6: Control Panel
Control Panel Displays Temperature or Timer Settings Current Temperature Keyboard Lock Up Button Down Button WiFi Light / button ON/OFF Button Mode Change Timer Button Button... -
Page 7: Manual Operation
Manual Operation After the heater has been plugged in and switched on, it will beep. The heater will come on • in standby mode. The WiFi and ON/OFF light will be on. To initiate heating, press the button. You will see the ECO mode icon. •... -
Page 8: Connecting To Wifi
Connecting to WiFi Download the APP onto your smart phone or tablet. You can find the app by scanning the QR code below or searching “SolAire WiFi IQ” in the Google Play or Apple app store. You will need to create an account, unless you already have an account. Create an account by tapping Register. - Page 9 The app will then display its connecting screen. If the heater fails to connect, press and hold the button for 3 seconds. It will switch to its secondary connection (AP) mode. Then follow the steps on the App for the AP mode. The heater will beep and display a solid WiFi icon once the device is connected.
-
Page 10: Controlling The Heater
Controlling the Heater You can change the heater’s mode by pressing the “mode” buttons. You can adjust the mode’s temperature using the + and – buttons. Temperature calibration If the heater reports a temperature that differs from the actual room temperature the thermostat can be re calibrated. - Page 11 Scheduling your Heating You can create a heating schedule to program the heater through the day. • The APP displays the schedule as a graph. Tap and Drag your finger on the screen • to programme the heater. The App will then let you pick from 3 heating modes: Comfort, Eco and Anti Frost. •...
- Page 12 Sol*Aire Heating Products Limited Contact details New Row Eppleby North Yorkshire DL11 7AW...
- Page 13 Sol*Aire Heating Products Limited Contact details New Row Eppleby North Yorkshire DL11 7AW...
-
Page 14: Warranty Information
Damage caused by non-observance of the user manual, e.g. connection to an unsuitable • mains supply or non-compliance with the installation instructions Partially or completely dismantled appliances • Sol*Aire Heating Products Big Shed New Row DL11 7AW Email: info@solairehp.co.uk Tel: 01325717899...
Need help?
Do you have a question about the Caldo Series and is the answer not in the manual?
Questions and answers