Advertisement
SMART TACHOMETER, SMART SPEEDOMETER INSTALLATION
Flush Mount Surface
1.
Use the dimensions provided to mark and drill the necessary holes for mounting the GPS to a flush mount surface.
53.6 mm
(2.1 in.)
2.
Secure the GPS antenna to the flush mount surface with three brass lockwashers and screws. Tighten the screws
securely.
3.
Connect the antenna harness to the GPS.
b
Marine Pole Mount
Avoid damage to the antenna harness and the GPS antenna. The marine pole mount assembly must be completely
installed and secured to the vessel before the SmartCraft GPS Antenna can be fastened to the antenna mount.
1.
Thread the antenna mount onto a standard mount pole. Tighten the antenna mount assembly securely.
2.
Thread the antenna mount assembly into the mount base and tighten securely.
3.
Guide the antenna harness through the mount base and through the antenna mount assembly.
4.
Thread the antenna harness onto the GPS. Tighten securely.
90-8M0104800 MARCH 2015
a
a -
GPS antenna
b -
25.4 mm (1 in.) hole
c -
Lockwasher
d -
Screw
a
e -
Antenna harness
c
d
e
31116
View from bottom. Template is not to scale.
a -
Connector for harness
b -
Holes for fasteners (3)
b
25.4 mm
(1.0 in.)
31115
NOTICE
Page 5 / 6
Advertisement
