Page 3
• All components and accessories are built with high-quality, heat-resistant materials. Polti products undergo rigorous testing. Vaporetto has also passed the Splash Proof Test, since it is designed to withstand jets. VAPORETTO is built according to IEC international standards, and is equipped with a valve, a safety tem- perature switch and an additional temperature switch for extra protection against dry running.
- If the appliance is left unused, always disconnect it refer to an authorized Polti Service Centre. from the mains. Never leave the appliance unatten- - This appliance is equipped with safety devices ded with the cable plugged into the mains.
ACCESSORY HOLDER BASE WITH WHEELS ADJUSTMENT STEAM In the Vaporetto GO, the smaller accessories are Vaporetto enables the flow of steam desired to be housed in the base (M). In order to access them, optimised by turning the adjustment knob (G) (Fig.
Page 7
VAPORETTO go gun must be kept, as temperature and pressure are position a cloth beyond the stain, in order to collect greatest at the time of release. In all cases, after up the dirt that has been “blown” away by the steam steaming, rub more stubborn dirt with a dry cloth or pressure.
VAPORETTO go To attach it, proceed as follows: STORING THE DEVICE First insert the front part, then push the appliance It is possible to replace the appliance by resting the downwards until you hear the lever click (O) (Fig. brush (3) with the hoses (2) and flexible hose (1) in 9).