Advertisement
Preparation
Use the latest versions of the gimbal firmware (20150521) and the
flight control firmware (20150710), or it can't be calibrated;
The calibration methods is also suit for gimbal G;
Begin to Calibrate
Place the aircraft in the horizontal position, power on the remote
1.
controller and the aircraft, and then press the bottoms of IOC,
Home and Auto-Take off/Landing in sequence;
2.
Roll down the left wheel (Flight Indicators Brightness Control Scroll
Wheel) and the right wheel (Camera Pitch Control Scroll Wheel) to
the bottom and keep it for 2s, and then release it;
1
Advertisement
