Download Print this page

XIRO Xplorer G Calibration Manual

Gimbal calibration methods

Hide thumbs Also See for Xplorer G:

Download this manual

G i m b a l C a l i b r a t i o n M e t h o d s

Page 1 G i m b a l C a l i b r a t i o n M e t h o d s...
Page 2 Preparation Use the latest versions of the gimbal firmware (20150521) and the flight control firmware (20150710), or it can’t be calibrated; The calibration methods is also suit for gimbal G; Begin to Calibrate Place the aircraft in the horizontal position, power on the remote controller and the aircraft, and then press the bottoms of IOC, Home and Auto-Take off/Landing in sequence;...
Page 3 The gimbal is in Power Off state (the camera don’t adjust itself when touching it); Calibration Fix the gimbal with the gimbal clamp; Press up the bottoms of IOC, Home and Auto-Take off/Landing in sequence, and the gimbal will be in Power On state, which indicates that the calibration is finished;...
Page 4 Checking Power off the aircraft, the remote control and then take off the gimbal clamp; At last, power on the remote control and the aircraft to check the gimbal, if it’s in the horizontal position, the gimbal is calibrated successfully.
Page 5 Shenzhen zero-tech UAV Limited Address： Hall A,15th Floor,NO,9 Global Digital Building, High-tech Third Centra Road,Technology Park, Nanshan,shenzhen,China Phone NO.： (+86) 4008 073 888 Zero-WeiBo Zero-Wechat...