Related Manuals for Salton EX-1016
Summary of Contents for Salton EX-1016
- Page 1 ® programmable 3-in-1 coffee centre espresso/cappuccino/filter coffee maker Instruction Booklet Model: EX-1016...
-
Page 2: Important Safeguards
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to Salton Canada for examination, repair or adjustment. See Warranty. -
Page 3: Polarized Plug
21. Do not open the Boiler Cap or remove the Filter Holder while machine is on, or as long as there is pressure in the boiler. To release the remaining steam, slowly turn the Steam Control Knob counterclockwise in order to release the pressure in a pitcher of cold water. -
Page 4: Description Of Parts
DESCRIPTION OF PARTS 1. Top Cover 2. Reservoir for filter coffee 3. Water Level Indicator 4. Swing-out Filter Holder 5. Filter Coffee Carafe 6. Keep Warm Plate 7. Boiler Cap 8. Espresso Strength Control Dial 9. Steam Control Knob 10. Espresso Filter Holder 11. - Page 5 3. To choose the 24 hour clock press the HOUR and MIN. pads simultaneously until AM or PM does not show in the LCD Display Window. Press the HOUR or MIN. Pads to change the time. 4. Press the PROGRAM pad twice to show the set time. MAKING FILTER COFFEE Plug into a 120 Volt AC outlet.
-
Page 6: Making Espresso Coffee
4. Select the desired time by pressing the HOUR and MIN. pads until you reach the desired program time. 5. Press the PROGRAM and COFFEE buttons together to activate the program. 6. This feature is activated when the AUTO indicator light is on. 7. -
Page 7: Making Cappuccino
11. Press the Espresso/Cappuccino button. The light will go on. The Espresso will soon start to flow into the Carafe. NOTE: The Steam Control Knob must be in the closed position. Warning: Do not attempt to remove either the Boiler Cap or Filter Holder during the brewing process. Scalding may occur. - Page 8 5. Once the milk has been frothed, turn the Steam Control Knob clockwise to close the Steam valve and remove the pitcher. Turn the Strength Control Dial back to the desired strength of the Espresso coffee and the coffee will continue to flow into the carafe.
-
Page 9: Care And Maintenance
8. Before removing the Filter Holder or the Boiler Cap be sure that there is no pressure left in the Boiler by slowly opening the Steam Control Knob. CARE AND MAINTENANCE 1. Unplug the appliance from the electrical outlet and allow to cool completely before cleaning. - Page 10 6. Place the Espresso Carafe on the Drip Tray. 7. Plug into a wall outlet and press the Espresso/Cappuccino On/Off Button. 8. Let the whole quantity of vinegar run through the machine, then turn the appliance off. 9. IMPORTANT: With the Espresso Strength Control Dial turned to the LIGHT position open the Steam Control Knob slowly to relieve the pressure before removing the Filter Holder or the Boiler Cap.
- Page 11 TROUBLESHOOTING PROBLEM SOLUTION 1. Coffee does not flow. • Remember to fill Reservoir or Boiler with water before machine is switched On. • Check if Switch is On. • Use a coarser grind of coffee. • Reduce the amount of coffee in the Espresso Filter.
-
Page 12: Limited Warranty
® SWG CANADA Customer Service Department 81A Brunswick Dollard-des-Ormeaux Quebec, Canada H9B 2J5 Website: www.salton.com E-mail: service@salton.com Fax: 514-685-8300 Tel: 514-685-3660 * Return/exchange policies at each retailer vary and may differ from the Salton Canada 1 year limited warranty period.