Analog Technologies VC97 Manual

Analog Technologies
Figure 1. The Photo of Actual VC97
Figure 2. The Photo of Actual Accessories
Figure 3. The Photo of Actual VC97
2352 Walsh Ave. Santa Clara, CA 95051. U. S. A. Tel.: (408) 748-9100, Fax: (408) 748-9111
Copyrights 2000 – 2012, Analog Technologies, Inc. All Rights Reserved. Updated on 11/22/2012
FEATURES
Display: 3 3/4 Digit LCD with a Max Readings of 3999,
Automatic Negative Polarity Indication
Measuring Method: Dual-slop Integrating A/D Converter
System
Sampling Rate: Approx. 3times/second
Over Range Indication: "OL" Display
Low Battery Indication: The LCD Display "
Power: 2pcs 1.5V AAA 7# Battery
APPLICATIONS
It's widely used for measuring DCV, ACV, DCA, ACA,
resistance, capacitance, frequency, temperature, etc.
DESCRIPTION
VC97 is a high performance, high accuracy, 3 3/4-digit,
32mm digit high by LCD displaying meter. The function
includes DCV, ACV, DCA, ACA, resistance, capacitance,
frequency, temperature, duty cycle measurement, triode,
diode and continuity test. Also with the function of unit
signal displaying, relative value measurement, auto range/
manual range switch, auto power off and warning function,
etc.
SAFETY INFORMANTION
The meter meets with IEC1010 standard. Read the notes
before operation.
 Before measuring, check the test leads carefully.
 Do not input a value over allowable limited when
measuring to avoid electric shock meter damage.
 Be careful when measuring voltage over DCV60V and
ACV40V.
 To select correct function.
 The test leads should be taken away from the testing
point when changing function.
 Never take measurement when the test leads are in
current terminal.
 Do not try to modify the circuit.
www.analogtechnologies.com
Multimeter
VC97
" Symbol
1