Table of Contents
Advertisement
2-4 Setting Switches
1.
Set full tray detector switch.
Towards You : detector OFF
Towards Other Side : full tray detector ON
NOTE
When full tray detector switch is on, lamp of
full tray lamp turns red after tray lowers at
the lowest position, then collating stops
automatically.
2.
Set jog mode.
Towards You : Vibration of jogger and
collating start/stop
simultaneously.
Towards Other Sidee : Jogger vibrates.
3.
Set tray descend time knob.
Clockwise :
Counterclockwise : Intervals lengthen.
Intervals shorten.
2. Installation and Operation Instructions
Full Tray Lamp
Full Tray Detector Switch
Jog mode Select Switch
Usable Range
9
Advertisement
Table of Contents
