Before Installing Pj-77/Pj-77R - Horizon Fitness PJ-77R Manual

2. Installation and Operation Instructions

2-1 Before Installing PJ-77/PJ-77R

Change installing position of tray unit ac-
cording to types of collators.
Installing positions can change by chang-
ing hook installed PJ-77/PJ-77R.
Lower position : VAC Series
Upper position : MAC Series
1.
Remove connector which connects PJ-77/
PJ-77R and tray.
2.
Remove fixing screws and tray unit.
3.
Install hook according to the type of colla-
tor.
4.
Install tray unit with reversed procedure of
removing it.
NOTE
Pay attention to the angle of tray unit. It is
installed with rear side lower in normal use.
When connecting PJ-77 to the collator
AC-1200/1600,
install QPP-259 P.C.B. on the collator.
Collator Serial Number
Install QPP-259 on the collator whose
serial number is as below.
AC-1200 ... up to 36899
AC-1600 ... up to 36910
How to install QPP-259 P.C.B.
1. Disconnect CON16 and CON17 from
QPW-252 P.C.B.
2. Install QPP-259 below QPW-252 inside
of the operation panel using the adhesive
tape stuck on the back side of QPP-259.
3. Connect CON16 and CON17 from QPP-
259 to QPW-252.
HAC Series
MC Series
AC Series
Tray Unit
Hook
6
Hook
Connector
Fixing Screws
Upper Position
(For MAC series)
Lower Position
(For VAC,HAC,
MC,AC Series)
CON17
(6 Pins)
CON16
(10 Pins)
QPW-252
CON17
CON16
QPW-252
14 Pins
6 Pins
QPP-259
10 Pins