Advertisement
DAY/NIGHT MENU
DAY/NIGHT - AUTO, COLOR, NIGHT, EXT1, EXT2
•
AUTO - Allows the camera to switch
from color to monochrome mode in
low light. The switching thresholds and
hysteresis time are adjustable. SMART
IR is not applicable for this model.
•
DAY - fixes the camera in color mode
•
NIGHT - fixes the camera in monochrome
mode.
•
Extern - NA
•
CDS - NA
WHITE BALANCE MENU
WHITE BAL - ATW (default), PUSH, MANUAL
•
ATW - the camera automatically
samples the image for optimum white
balance
•
PUSH - Allows the white balance to
be set automatically and locked. This
option is normally used when no white
reference is present in the image. To set
the white balance, hold a white object
in front of the camera, with light from the source falling on it and press
the joystick to set and lock the white balance
•
MANUAL - this option allows the Red and Blue gain to be manually set in
the image. Note, using this option requires care to ensure all cameras on
one system have the same color response.
DISPLAY ADJ
DISPLAY ADJ - OFF, ON - Press to open submenu.
•
GAMMA - 0.35~0.70, default 0.45 - sets
the gamma response of the camera.
This used to compensate for the output
response of different display types. It can
also be used to bring out details in low
light areas of an image.
•
CHROMA - Level control
•
SHARPNESS - Level control
•
DE-BACK NOISE - Level control
•
SHADING - Level control for lens
•
RESOLUTION - Level control
•
WARM COLOR - Level control
•
COOL COLOR - Level control
IMAGE
IMAGE-
•
BACKLIGHT - OFF, BLC, HLC
•
BLC - Adjust the area to be enhanced
and sets the level. Initial resets the BLC
setting to defaults.
•
HLC - (High Light Compensation ) Low,
Middle, High. This inverts over exposed
areas from white to black
•
CONTRAST - OFF, D-WDR, DEFOG
•
D-WDR- Auto, Manual - Actively controls gamma compensation to provide
optimal image exposure in images with extremes of lighting
•
DEFOG - Improves the clarity of image obscured by fog and snow by analysing
the brightness of the image and compensates the color of the image.
DAY/NIGHT
•
POSI/NEGI - Selects what effect you want on the image
Auto
•
H-MIRROR- OFF/ON, Set this feature to ON to show a mirror image of the
DAY
camera view.
NIGHT
EXTERNAL
NA
•
PRIVACY ZONE - OFF, ON - Press to open submenu.
CDS
NA
•
AREA NO - 1~8, Select the privacy zone
•
DISPLAY -Set to on settings will be applied
RETURN
•
TOP/BOTTOM/LEFT/RIGHT - sets the X/Y positions of the sides of the selected
zone
•
INITIAL - Pressing enter resets the selected zone to its factory defaults. Only
available when the zone is enabled
WHITE BAL
WHITE BAL
ATW
R-Y
•
DNR - OFF, ON - Press to open submenu.
[ 63]
LEVEL - LOW, MIDDLE, HIGH - Controls the level
B-Y
[ 96]
of digital noise reduction applied to the image.
RETURN
Increasing DNR may soften the image.
MOTION - OFF, ON - Press to open submenu.
•
SENSITIVITY - Set sensitivity threshold, A high figure makes the zone more
sensitive.
•
AREA-1~4, Select motion detection zone
•
AREA USE If selected "MOTION..." will be
DISPLAY ADJ
displayed on screen
GAMMA
[
5]
CHROMA
•
TOP/BOTTOM/LEFT/RIGHT - sets the
[ 3]
SHARPNESS
[ 3]
X/Y positions of the sides of the selected
DE-BACK NOISE [ 3]
zone.
SHADING
[ 0]
RESOLUTION
[ 15]
•
INITIAL - Pressing enter resets the
WARM COLOR [ 8]
selected zone to its factory defaults.
COOL COLOR
[ 5]
Only available when the zone is enabled .
RETURN
•
SYSTEM gives access to basic camera configuration
•
CAM TITLE - OFF, ON turning ON enables sub menu to enter upto 8
characters for a camera title.
•
CAM ID- Camera Number
•
ID DISPLAY - OFF,ON
•
SYNC - INT, LINELOCK
•
BAUDRATE - NA
IMAGE
•
PROTOCOL - NA
BACKLIGHT OFF
CONTRAST
OFF
•
LANGUAGE -Default to English
POSI/NEGA POSI
•
SPECIAL
H-MIRROR
OFF
PRIVACY
OFF
• DEFECT DETECTION - Used to correct
RETURN
bad pixils
• FONT COLOR - 1-8
• VERSION - Display firmware version
DNR
DNR
LEVEL
LOW
RETURN
MOTION
MOTION SET
MOTION DET
OFF
DETECT SENSE
111
OFF
BLOCK DISP
DETECT AREA
MONITOR AREA
RETURN
SYSTEM
SYSTEM
CAM TITLE
OFF
CAM ID
0-255
ID DISPLAY
OFF
SYNC
INT
BAUDRATE
NA
PROTOCOL
NA
LANGUAGE
ENG
SPECIAL
RETURN
EXIT MENU
•
EXIT - SAVE, RESTORE, INITIAL. select SAVE to save any changes made to the
camera settings to flash memory and exit the menu. Select RESTORE to reject
any changes made to the camera settings and exit the menu. INITIAL defaults
the camera setting back to default.
SPECIFICATIONS
System
CCD
Sensor
1/3" Advanced High Sensitivity Sensor
Effective Pixels
Performance
Resolution
Sensitivity
S/N Ratio
Day / Night
Lens
Type
2.8~12m, 9~22mm DC Varifocal
Mount
Functions
OSD
Shutter
Flickerless
D-WDR
DEFOG
AUTO/MANUAL/Low/Medium/High
AGC
SENS UP
Electronic shutter
Off/On 1/200,000 sec maximum
Sync
Camera ID Number
Camera Name
White Balance
3D DNR
Gamma
Motion Detection
4 areas, Off/On, Position & Sensitivity
Privacy masking
8 areas, Off/On, Color, Position
Image functions
Sharpness, Mirror, Defog, HLC, BLC,
Input/Output
Video Output
CVBS 1.0Vp-p 75Ω - Service port
Programming interface
Power
D Model
12VDC/24VAC ±10% 2.5W max
Physical
Construction
Dimensions (mm)
108Ø x 95mmH (4.24"Ø x 3.47"H)
Weight
Mounting
Environmental
Operating Temperature
Humidity
Less than 90%, non condensing
Order Codes
White 2.8~12mm
9~22mm
NTSC
960x494 NTSC
700TVL
0.05Lux
52dB
Software Controlled
14mm straight
English, Chinese
1/60~120,000
On/Off
Off/Low/Medium/High
Adjustable Level
Adjustable Level 512x
Internal
Off/On 1~255
Off/On, 8 Characters
ATW/Push/Manual
Off/Low/Middle/High
0.35,0 .4, 0.45, 0.5, 0.55
Negative, Shade Comp
CVBS 1.0Vp-p 75Ω - BNC
On board joystick
Polycarbonate Shell
Polycarbonate Bubble
550g (1.21 lb)
Surface
-10°C~+50°C
in52S9N2D28V12
in52S9N2D9V22
Advertisement
