Advertisement
2
Dry your hair
1 Connect the plug to a power supply socket.
•
For precise drying, attach the concentrator (
•
To disconnect the attachment, pull it off the hairdryer.
2 Adjust the airfl ow switch (
or
for strong airfl ow and fast drying. Press the Turbo button
(
) for extra airfl ow.
h
3 Adjust the temperature switch (
warm airfl ow, or
(
) for cool airfl ow to fi x your style.
i
After use:
1 Switch off the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Take the air inlet grille (
» To remove the air inlet grille, press the thumbrests on the left
and the right side of the air inlet grille simultaneously and pull
it off the appliance.
» To reattach the air inlet grille, press the thumbrests on the
left and the right side of the air inlet grille simultaneously and
press it onto the appliance.
4 Clean the appliance by damp cloth.
5 Keep it in a safe and dry place, free of dust. You can also hang it
with the hanging loop (
3
Guarantee and service
If you need information e.g. about replacement of an attachment
or if you have a problem, please visit the Philips website at
www.philips.com/support or contact the Philips Customer Care
Centre in your country. The phone number is in the worldwide
guarantee leafl et. If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
) to
g
f
for cool airfl ow. Press the Cool shot button
) off the appliance to remove hair and dust.
d
).
e
) onto the hairdryer (
a
for gentle airfl ow and styling,
) to
for hot airfl ow,
).
b
for
Advertisement
