Advertisement
2
Straighten your hair
1 Connect the plug to a power supply socket.
2 Slide the on/off switch ( ) to
» The power-on indicator ( ) lights up.
» After 30 seconds, the appliance heats up.
» The ion function activates when the appliance is switched on.
The function provides additional shine and reduces frizz.
When the function is on, a special odor may be smelt and a
sizzling noise may be heard, which is normal and caused by
the ions that are generated.
3 Slide the closing lock ( ) to unlock the appliance.
4 Comb your hair and take a section that is not wider than 5cm
for straightening.
5 Place it between the straightening plates ( ) and press the
handles together.
6 Slide the straightener down the length of the hair in a single
motion (max. 5 seconds) from root to end, without stopping to
prevent overheating.
•
To create fl icks, turn the straightener half-circle inwards
(or outwards) when it reaches the hair ends. Hold the
straightener in that position for 2 to 3 seconds, and then
release it.
7 After 20 seconds, repeat step 6 until you achieve the desired
look.
8 To straighten the rest of your hair, repeat steps 4 to 7.
After use :
1 Switch off the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Clean the appliance and straightening plates by damp cloth.
4 Lock the straightening plates ( ).
to switch on the appliance.
Advertisement
