Statement Of Conformity; Notes And Warnings - Siemens 7XR61 Series Short Directions For Use

English

Statement of Conformity

This product complies with the directive of the Council of the European Communities on the
approximation of the laws of the member states relating to electromagnetic compatibility
(EMC Council Directive 2004/108/EC) and concerning electrical equipment for use within
specified voltage limits (Low-voltage Directive 2006/95/EC).
This conformity has been proved by tests performed according to the Council Directive in
agreement with the generic standards EN 61000-6-2 and EN 61000-6-4 (for EMC directive)
and with the standards EN 60255-6 (for low-voltage directive) by Siemens AG.
The device is designed and manufactured for application in industrial environment.
The product conforms with the international standards of IEC 60255 and the German
standards VDE 0435.

Notes and Warnings

The warnings and notes contained in this booklet serve for your own safety and for an
appropriate lifetime of the device. Please observe them!
The following terms are used:
4
DANGER
indicates that death, severe personal injury or substantial property
damage will result if proper precautions are not taken.
Warning
indicates that death, severe personal injury or substantial property
damage can result if proper precautions are not taken.
Caution
indicates that minor personal injury or property damage can result if
proper precautions are not taken. This is especially valid for damage on
or in the device itself and consequential damage thereof.
7XR6100-0*A00
C53000-B119U-C124-1