Download Print this page

Electromagnetic Fields (Emf) - Philips HP4996/00 User Manual

Philips hairdryer hp4996/00 2500 w
Hide thumbs Also See for HP4996/00:

Advertisement

If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualified persons in
order to avoid a hazard.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
For additional protection, we advise you to install a residual current
device (RCD) in the electrical circuit that supplies the bathroom.
This RCD must have a rated residual operating current not higher
than 30mA. Ask your installer for advice.
If the appliance overheats, it switches off automatically. Unplug the
appliance and let it cool down for a few minutes. Before you switch
the appliance on again, check the grilles to make sure they are not
blocked by fluff, hair, etc.
Noise level: Lc = 85 db(A)

Electromagnetic fields (EMF)

This appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions
in this user manual, the appliance is safe to use based on scientific
evidence available today.
Environment
Do not throw away the appliance with the normal household
waste at the end of its life, but hand it in at an official collection
point for recycling. By doing this, you help to preserve the
environment.

Advertisement

loading

This manual is also suitable for:

Hp4996