Table Of Contents - HENNESSY INDUSTRIES Coats 4050A Safety Instructions, Operating Instructions, Installation Instructions, Maintenance Instructions

Table of Contents

Definitions of Hazard Levels ................................1
Owner's Responsibility ........................................1
Principal Operating Parts .....................................2
Operating Instructions .........................................3
Bead Loosening and Demounting ................3
Mounting .........................................................5
Inflation ..................................................................6
Bead Sealing ...................................................6
Bead Seating ...................................................6
Inflation ...........................................................7
Performance Tires/Custom Wheels ....................8
Custom and Special Wheels ................................9
Tube Type Tires ...................................................12
Stages of Inflation ...............................................10
Bead Seal ......................................................10
Bead Seat ......................................................10
Inflation .........................................................10
Mis-Matched Tires and Wheels .........................10
Maintenance Instructions ..................................11
Installation Instructions .....................................13
Critical Safety Instructions .................Back Cover
Operator Protective Equipment
Personal protective equipment helps make tire
changing safer. However, equipment does not
take the place of safe operating practices.
Always wear durable work clothing during tire
service activity. Shop aprons or shop coats may
also be worn, however loose fitting clothing
should be avoided. Tight fitting leather gloves
are recommended to protect operator's hands
when handling worn tires and wheels. Sturdy
leather work shoes with steel toes and oil
resistant soles should be used by tire service
personnel to help prevent injury in typical shop
activities. Eye protection is essential during tire
service activity. Safety glasses with side shields,
goggles, or face shields are acceptable. Back
belts provide support during lifting activities
and are also helpful in providing operator
protection. Consideration should also be given
to the use of hearing protection if tire service
activity is performed in an enclosed area, or if
noise levels are high.
WARNING
death to operator or bystander or damage to
property. Do not operate this machine until you
read and understand all the dangers, warnings
and cautions in this manual. Download a copy of
the manual from
www.ammcoats.com, or for further information,
contact:
Hennessy Industries, Inc.
1601 J.P. Hennessy Drive
LaVergne, TN 37086-3565
(615) 641-7533 or (800) 688-6359
www.ammcoats.com
For additonal tire, wheel, and/or inflation
information contact the following:
RUBBER MANUFACTURERS ASSOCIATION
1400 K Street N.W.
Washington, DC 20005
(202) 682-4800
www.rma.com
TIRE GUIDES, INC.
The Tire Information Center
1101-6 South Rogers Circle
Boca Raton, FL 33487-2795
(561) 997-9229
www.tireguides.com
Failure to follow danger,
warning, and caution
instructions may lead to
serious personal injury or
our website at