Caliber HFB 200 Directions For Use

Buttons & Functions:
Button Functions
Red Button Power On/Off, reject call, end call
Blue Button Pairing, voicedial, answer call, last number
redial, transfer call, connect mobile phones

LED Indication:

Car kit status Blue LED indicate
Standby
Idle Flash every 3 seconds
Telephone conversation Flash every 3 seconds
Pairing in progress Blue and red LED flash one by one

Operations:

Current State Want to
Device off Turn on
short
Pair
Device On Turn off
short
Standby Voicedial
Last number
redial
Incoming call Answer
Reject
When calling End call
When calling Shift to
mobile phone /carkit mobile phone and carkit
Connection lost Reconnect
(prompted to handset
by hand set)
Red LED indicate
Flash every 3 seconds
Bright
Bright
Actions step by step
Press and hold until you hear two
"beep" sounds. After power on, the car kit
will try to connect to "last connected AG"
Refer to "Direction for first use"
Press and hold until you hear two
"beep" sounds
(First Make sure your Bluetooth mobile has
voice recognition feature) Short press
and then speak some one's name in your
phonebook
Press and hold until you hear two short
"beep" sounds. If the phone is connected, the
operation will be on 'last used phone".
Short press
Short press
Short press
Short press to switch between your
Short press
HFB 200
WWW.CALIBER.NL