Philips HP6444/00 User Manual page 8

ENGLISH
8
0 = off
I = normal speed
II = high speed
G
Inlet socket for appliance plug
H
Appliance plug
I
Cord
J
Adapter
K
Brush
L
Exfoliating head
Using the appliance
Make sure your skin is clean, entirely dry and free from grease.
Do not use any cream before you start epilating.
1 Put the adapter (J) in the wall socket.
2 Insert the appliance plug (H) into the inlet socket (G) (Fig. 2).
3 Remove the protective cover (A) (Fig. 3).
4 Switch the appliance on by sliding the on/off switch (F) to the
desired speed setting:
Select speed I (Fig. 4) for areas with little hair growth and for
areas where bones are located directly beneath the skin, such as
knees and ankles.
Select speed II (Fig. 5) for larger areas with stronger hair growth.
5 Stretch the skin with your free hand to make the hairs stand
upright (Fig. 6).
6 Place the epilating head (D) perpendicularly onto the skin so that
the epilating head (D) and the pain softener (E) are in proper
contact with the skin.
7 Move the appliance slowly, with the pain softener (E) pointing
forward, against the direction of hair growth. Do not exert any
pressure (Fig.7).
8 Stretch your leg when you are epilating the back of your knee.