Warnings And Safety Notes - Siemens SCD 1515-E Operating Instruction

Operating Instruction
1.2

Warnings and Safety Notes

Transport
The LCD-monitor should only be transported in its original packaging to ensure it will be
properly protected against shocks and rough handling.
Setting Up
When installing the monitor, it should be noted whether any moisture (condensation) has
entered the unit during transport or storage. Additional important installation information can
be found in the "Technical Data" chapter.
EMC
This monitor is equipment of Class A and fulfils the industry area of emission and immission.
Repairs
Before the unit is opened, it must be switched off and the power supply disconnected. Only
authorised persons may open the unit.
Additions or changes to the unit may damage the system or affect its EMC behaviour.
Cleaning
The unit must be isolated from the power supply before cleaning. If heavily soiled, the LCD-
monitor can be cleaned with a damp cloth and mild detergent. Care must be taken to ensure
that no moisture enters the unit during cleaning.
Scouring powders and solvents are never allowed to come in contact with the unit. Only
qualified service technicians should clean the inside of the unit.
LCD-Monitor SCD 1515-E page 35 / 56
DOC-No.: B30058DE8.doc